Thinking of FI my stroker.
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Thinking of FI my stroker.
I have a 414 stroker and was thinking of a s/c or a turbo. I have a flat top piston w/ 2cc. If I just change my heads to a stock 6.0 317 cast what would my comp be and could I do a s/c? I am trying to do this w/out tearing the motor apart just to change the pistons.
#2
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeremym
I have a 414 stroker and was thinking of a s/c or a turbo. I have a flat top piston w/ 2cc. If I just change my heads to a stock 6.0 317 cast what would my comp be and could I do a s/c? I am trying to do this w/out tearing the motor apart just to change the pistons.
Sure all you could do now is swap heads, but you wouldnt be able to make alot of boost b/c of compression. what's the point of spending 3-5K if you can only run 5-10lbs of boost??
IMO, if you're going to take the FI plunge, do it right. you'll want new pistons/rings/heads and then you'll need to upgrade your entire fuel system to support the new power.
This is one reason why i was on bottle for so long. I told myself that i didnt want to go FI and make the same HP(710HP on the bottle) or just a little more HP. If i was going to do it, i'd go for a BIG setup.
Do it once and do it right.
Last edited by TINKRD; 11-27-2006 at 07:21 PM.
#5
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TINKRD
by using your current piston and 317 casting heads your static compression will still be around ~10.5:1
#6
TECH Addict
iTrader: (5)
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeremym
I could do a procharger around that comp. Even at low boost I should make good power.
Good luck.
#7
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LSs1Power
On that motor and compression a D-1SC can supply you with enough air up to 750rwhp. If you dont have an A/C and plan to change the pistons in the future then I would look at starting with a larger blower such as F1-A or F1-C.
Good luck.
Good luck.
Trending Topics
#13
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeremym
I could do a procharger around that comp. Even at low boost I should make good power.
#16
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V6 Bird
Then you'll have more excuses then you do now about getting beat...eheh
Last edited by jeremym; 11-29-2006 at 10:28 PM.
#19
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeremym
What do you mean? Who have I lost too? I have only lost twice with my set up. One was a 522ci stroker RSI viper and I lost by 1 car and that was motor to motor, and the other was a N2O car with me on motor and him on N2O.
On the street its anything goes...Spray, NA, FI, etc....Cant complain when you bring a knife (NA car) to a gun fight.
You've had enough tuning issues as it is, pull the pistons and swap em. move to a 6.0 head ( I have some that will outflow what you got on your car by a huge margin) and put it back together. Put you a custom kit on the car with a 91.5mm Thumper in the gril and drive the **** out of it. Please dont take my advice. My car is still in pieces.
#20
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V6 Bird
You have to race people to actually win or lose
On the street its anything goes...Spray, NA, FI, etc....Cant complain when you bring a knife (NA car) to a gun fight.
You've had enough tuning issues as it is, pull the pistons and swap em. move to a 6.0 head ( I have some that will outflow what you got on your car by a huge margin) and put it back together. Put you a custom kit on the car with a 91.5mm Thumper in the gril and drive the **** out of it. Please dont take my advice. My car is still in pieces.
On the street its anything goes...Spray, NA, FI, etc....Cant complain when you bring a knife (NA car) to a gun fight.
You've had enough tuning issues as it is, pull the pistons and swap em. move to a 6.0 head ( I have some that will outflow what you got on your car by a huge margin) and put it back together. Put you a custom kit on the car with a 91.5mm Thumper in the gril and drive the **** out of it. Please dont take my advice. My car is still in pieces.
you selling those heads?
i'm thinking of going with some ported L92 w/ a carb intake to match....but still just thinking about it. lots more research to do.