LT1 Turbo Build PT.2 S400 Turbo 396ci's....
#22
TECH Apprentice
iTrader: (1)
Join Date: Oct 2002
Location: Albuquerque, NM
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by prostock_bigblock
is the s400 a magestic turbo brand?
Hope I answered your question.
Eric
#23
12 Second Club
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Eric Bazan
No, it is Borg Warner unit that many vendors sell, including Majestic. You can also pick one up from a vendor(forced inductions) here on LS1tech. Although, I believe they sell the upgraded units.
Hope I answered your question.
Eric
Hope I answered your question.
Eric
#24
TECH Junkie
iTrader: (14)
Originally Posted by T/A KID
Real quick you shoud know as good as I do that the LT1 oil coolers are JUNK. I know numerous people who haved blocked that off on street and race cars. I believe the oil coolers came on the 93-95 models and they didn't on the 96-97.
Go look at a LT1 impala or Corvette they are blocked off from the factory.
Many people report cooler oil temps after taking the oil cooler off b/c it tends to get gooped up on the inside and actually restricts flow.
Look it up on camaroZ28.com been discussed many times. I say ditch it JMO.
Go look at a LT1 impala or Corvette they are blocked off from the factory.
Many people report cooler oil temps after taking the oil cooler off b/c it tends to get gooped up on the inside and actually restricts flow.
Look it up on camaroZ28.com been discussed many times. I say ditch it JMO.
#27
Originally Posted by frcefed98
Mr pippy made me sad
As in sick, cool, rad whatever the kids say now
Seriously though, it's nice to see a setup like that. Did you make the log as well? I am contemplating getting back into the game again
#29
Chris, nope the log headers were actually a set of conversion headers that I spotted while roaming through summit racings website. Saw em and told my bro these should work cherry for a set of quickie turbo headers and still clear everything. He ordered em and **** if they just went right up I still had to clearance one of them to clear the motor mount on the passenger side, but that was it. They were a conversion header for a Toyota land Cruiser-SBC swap. If they crack, they are cheap to replace or easy to weld up
As for what the cool kids say....who knows I'm old, but I gotcha now
It'd be great to see you back in the FI game and to trade posts with you on how fast our cars are running like we use to back in the day on LSshit.com
OneMeanZ, Thanks man and thanks for "telling" us to listen to deftones....I DL'ed a ton of their stuff last week and its some great music
As for what the cool kids say....who knows I'm old, but I gotcha now
It'd be great to see you back in the FI game and to trade posts with you on how fast our cars are running like we use to back in the day on LSshit.com
OneMeanZ, Thanks man and thanks for "telling" us to listen to deftones....I DL'ed a ton of their stuff last week and its some great music
#30
Glad I traded in my 93 Z28 on a 98 Formula LS1 back in the day...life has been much more enjoyable when working under the hood since then
Everyone will focus on Motor and Turbo.
Also to see a the oil cooler lines go here http://shbox.com/1/oil_cooler.jpg
And to see the waterpump differences go here http://shbox.com/1/lt1_water_pumps.jpg
From what I know the factory Vette's use better oil and they did not need oil coolers, also GM decided not to run them anymore on the later 96-97 models.
#32
Brining this back, my friend lately has decided he wants to go turbo and has asked me to help. I am more of a Procharger guy, but he wants to go with a Single Turbo.
Guys how much we looking to just to the Turbo with all the goodies, not including Tune, Fuel system, etc.
Basically just the Turbo, BOV, Tubing, reverse Headers, and all the other Turbo related parts.
He thinks he can do it for like 2500 but I think thats way to Cheap Eric and Frcfed98 how much for your turbo setup.
Btw could you use shortly LT1 headers reversed???
Guys how much we looking to just to the Turbo with all the goodies, not including Tune, Fuel system, etc.
Basically just the Turbo, BOV, Tubing, reverse Headers, and all the other Turbo related parts.
He thinks he can do it for like 2500 but I think thats way to Cheap Eric and Frcfed98 how much for your turbo setup.
Btw could you use shortly LT1 headers reversed???
#33
$3500-4000 is a good number, keeps climbing from there. Yep you can use LT1 headers turned around, there is a guy on turbomustangs.com that has some great photo's of his LT1 kit with some sort of shorty header turned around and modified a lil...
We did this for a small bit cheaper but I have great luck finding good deals on materials and parts.
We did this for a small bit cheaper but I have great luck finding good deals on materials and parts.
#35
ok, thanks guys I will pass the info to him. I found a awsome place to buy madrel bent elbow's and they just made me a aluminum 4inch Elbow with a Tight 6inch center line radius that I plan on using for my D1SC, Cost me 16.00 plus shipping. I will post the link later
How much were the headers you guys are using. He likes my 4inch OBX intercooler so we will run one of those as well.
How much were the headers you guys are using. He likes my 4inch OBX intercooler so we will run one of those as well.
#37
9 Second Club
iTrader: (14)
Originally Posted by frcefed98
$3500-4000 is a good number, keeps climbing from there. Yep you can use LT1 headers turned around, there is a guy on turbomustangs.com that has some great photo's of his LT1 kit with some sort of shorty header turned around and modified a lil...
We did this for a small bit cheaper but I have great luck finding good deals on materials and parts.
We did this for a small bit cheaper but I have great luck finding good deals on materials and parts.
#38
Yeah i'm refering to you...wanna do something about it like post a ******* link to the pics Gots to show our LT1 DIY'er peeps more options in regards to turbocharging their rides. The more options they have the more fast 4th gens we have out there slapping stangs around.
As for the conversion headers we used, they were a tad under 300 if I remember right...i'm wanting to say 250 bucks...Eric will have to chime in as he is the one that spent the $$ on em I just found em
As for the conversion headers we used, they were a tad under 300 if I remember right...i'm wanting to say 250 bucks...Eric will have to chime in as he is the one that spent the $$ on em I just found em
#40
TECH Apprentice
iTrader: (1)
Join Date: Oct 2002
Location: Albuquerque, NM
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of those headers. I like 'em
The cost of my headers were $289 from summit.
I believe you might be able to get it done for $2500-$3500. Thats just hot and cold side. If you shop smart, I believe its probably doable. I havent really paid attention to how much I've got in my set up, but whats really saved me is the cost of the turbo. I couldnt pass up such a great deal, and I can always upgrade it to a S series. Even then I'll have a bad *** turbo for @ $1900 or so, with the cost of the turbo.
Eric