BOSS APPROVED!
ATI Damper
Originally Posted by Whitez406
Wheres the cheapest place to buy one? When using the SDCE setup can you run the 10% underdrive or must you use standard dampner?
Bob at EPP has them. You can use either one. I stuck with the standard diameter.
Well it really depends...if you're running a stock or stripped car without a huge stereo system then I'd go with the 10% underdrive...but if you have something that your lights are already dimming then definitely don't go with one... I noticed a sizable difference when I put mine on...Well I also took the AC belt off too at the same time... It was a good SOP feel if you know what I mean... =)
Trending Topics
If you get an 8 rib pulley system the ATI (not ati procharger, different ati) is mandatory. The 8 rib crank pulley will not work on the stock damper.
I honestly cannot remember if i got the 10% underdrive or not, been a couple months since i ordered it!
I honestly cannot remember if i got the 10% underdrive or not, been a couple months since i ordered it!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
The ATI ProCharger eight rib pulley gets bolted to the balancer. The factory balancer doesn't have the provisions for this, and the only brand that we have found to fit the ProCharger pulley is by the harmonic balancer company, ATI Performance Products. Bob