Tc76mps
#101
Originally Posted by MIAPLAYA
Although I know the HP series wheels are used in the GT-K I think there are some other changes. I asked the engineers if you could do exactly what you are asking and they said you couldn't due to differences in compressor wheel design between the HP76 (T76) and the GT-K variant...
Ahh, can Forcedinductions CNC my wheel, or the cover to fit my turbo. They have CNC machines programmed for that crap. So I'm sure its possible right??
#102
Originally Posted by Stupid Boost
Ahh, can Forcedinductions CNC my wheel, or the cover to fit my turbo. They have CNC machines programmed for that crap. So I'm sure its possible right??
#103
Originally Posted by Stupid Boost
Yup.....well 1 out of who knows how many is pretty damn good for FI and Turbonetics.....just had to be the guy with the most amount of trouble.
#105
TECH Apprentice
iTrader: (1)
Join Date: Oct 2002
Location: Albuquerque, NM
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Wow, this sucks. If frcefed did receive the wrong unit, who is responsible? Forcedinductions or T-netics? Will forcedinductions/ T-netics work with him to make things right?
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
Last edited by Eric Bazan; 01-31-2007 at 09:15 AM.
#106
TECH Junkie
iTrader: (14)
Originally Posted by Eric Bazan
Wow, this sucks. If frcefed did receive the wrong unit, who is responsible? Forcedinductions or T-netics? Will forcedinductions/ T-netics work with him to make things right?
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
Jon
#107
Originally Posted by Eric Bazan
Wow, this sucks. If frcefed did receive the wrong unit, who is responsible? Forcedinductions or T-netics? Will forcedinductions/ T-netics work with him to make things right?
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
We'll try to get his turbo pulled off today after he gets off of work and measure it. It snowed here last night, but we should be able to git 'er done today.
Take it ez, guys
Eric
#108
Originally Posted by DrTurbo
Not sure who would be at fault. Could be either one of us. I know we only order large units. No small stuff....but could have just been a mis-understanding between us and them. But either way, measure it and PM me. If it indeed was a mix up, we'll have it taken care of.
#111
TECH Apprentice
iTrader: (1)
Join Date: Oct 2002
Location: Albuquerque, NM
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DrTurbo
Not sure who would be at fault. Could be either one of us. I know we only order large units. No small stuff....but could have just been a mis-understanding between us and them. But either way, measure it and PM me. If it indeed was a mix up, we'll have it taken care of.
Thanks from myself and frcefed
Eric
#112
Originally Posted by Eric Bazan
Sweet! Thanks DrTurbo! And thank you Miaplaya for all your help. We'll get this done today for sure.
Thanks from myself and frcefed
Eric
Thanks from myself and frcefed
Eric
#113
Originally Posted by MIAPLAYA
In the end the biggest thanks should go to Dr.Turbo for stepping up and making things right. That's the sign of a shop this is truely commited to its customers. Again I'll say my intention here was never to bad mouth or discredit any shop. I was merely trying to assist a Turbonetics owner who was not getting the performance he expected and appeared to have something other then what he thought he was getting. By no means did I want to call into question the integrity of anyone here. Dr.T has stated that he will correct any error that may have been made. That's a stand up thing to do. He and his company should be commended for that.
#116
Originally Posted by 52172
Tell me about it don't forced inductions sell 600-700 turbos a DAY!!!!????