What a real muffler for a turbo car looks like
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i bit the bullet and got a Magnaflow 3.5" stainless muffler.On the car currently is a Hooker Aerochamber.I talked with a guy in this section who has my exact setup but with a LT1 instead and he said he saw a huge reduction in backpressure as well as a modest decrease in noise so well see how it does.....man they are expensive though.and its HUGE!i opened the box and was like holy crap!
![](http://i5.photobucket.com/albums/y159/ddnspider/Picture164.jpg)
Last edited by ddnspider; 05-02-2007 at 10:19 PM.
#4
TECH Senior Member
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We went with a dynatech split flow on my bro's set up, it flows a lil..
http://www.afabcorp.com/AFCO_Dynatec...ode=split-flow
3.5 in and out and just a thin perforated "Baffle" in the center.
http://www.afabcorp.com/AFCO_Dynatec...ode=split-flow
3.5 in and out and just a thin perforated "Baffle" in the center.
#5
9 Second Club
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by frcefed98
We went with a dynatech split flow on my bro's set up, it flows a lil..
http://www.afabcorp.com/AFCO_Dynatec...ode=split-flow
3.5 in and out and just a thin perforated "Baffle" in the center.
http://www.afabcorp.com/AFCO_Dynatec...ode=split-flow
3.5 in and out and just a thin perforated "Baffle" in the center.
Trending Topics
#9
9 Second Club
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by frcefed98
wha????
We will be finding out just how loud it is in about a week. All the hot parts are on the way home from the coaters. The exhaust dumps just before the rear axle, 396ci, S400 set up.
J![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
We will be finding out just how loud it is in about a week. All the hot parts are on the way home from the coaters. The exhaust dumps just before the rear axle, 396ci, S400 set up.
J
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
I got an offset version magnaflow so mine isn't straight though. I used to run a borla XR-1 and it was still wayyyyy too loud.
#11
9 Second Club
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ddnspider
yeah the 3.5" is offset.u list ur whole setup in that other thread in here but dont list a cam.ive got more cubes and a 383 so curious about the diff depending on your cam and with me having a smaller DP and no second muffler
24x/23x, 64x-61x on a 114+4 stenod/camotion custom grind
When my cut-out is open, it is a straight, short 4" dump with no mufflers. When the cut-out is closed.....it is 3" with the two mufflers.
#20
LS1Tech Co-Founder
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I had my YSi setup, I tried some different dual mufflers, and the final set were Magnaflows, worked great.
I'm running a 4" Dynomax bullet with my current single turbo setup, gets the job done but bulllets never sound good on LS1's IMHO.
I'm running a 4" Dynomax bullet with my current single turbo setup, gets the job done but bulllets never sound good on LS1's IMHO.