New BMR K-member
#1
New BMR K-member
I asked BMR to build me a K-member with side tubes that started off straight down and then curved in to replace the current design of tubes that ran straight/diagonally across.
BMR did an awesome job on it and they are going to make it part of there line.
Opens up some serious room for downpipes-
http://www.ls1speed.com/pictures/k001.jpg
http://www.ls1speed.com/pictures/k002.jpg
http://www.ls1speed.com/pictures/k003.jpg
http://www.ls1speed.com/pictures/k004.jpg
BMR did an awesome job on it and they are going to make it part of there line.
Opens up some serious room for downpipes-
http://www.ls1speed.com/pictures/k001.jpg
http://www.ls1speed.com/pictures/k002.jpg
http://www.ls1speed.com/pictures/k003.jpg
http://www.ls1speed.com/pictures/k004.jpg
Trending Topics
#9
i think the way those kmembers are you can route the exhuast with a c6 manafold on the passenger side around the AC, then route the downpipe around it to, lease it looks like from the pics.
#10
I cut the bars off my k member two years ago and just bent new ones and tigged them on. Its nearly identical to yours. It was the only way to get a 5" exhaust to fit on my set up. I believe the bmr fab project fbody did a similar thing also when he was building his turbo kit. I know at least some of his bars were changed around.
#13
Originally Posted by jks hugger orange ss
Nice, any idea when they will be available for the rest of us?
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
#14
Originally Posted by Dragframe
any lt1 love?
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
#15
Originally Posted by BMR Fabrication Inc.
They will be available in the next week or so. The pricing will be additional $100.00 over the standard K-member. If you have any other questions feel free to ask
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
Lee Spicher
lee@bmrfabrication.com
(813)986-9302