TAEnvy

iTrader: (2)

I had a guy tell me he was running twin 75m turbos on an LQ9 based motor, topped with afr 225s, a fast 90/90 all on pump gas.

He claims 1400hp and 1500 ft/lbs.

Yall think hes BSing or is this viable.

Im not big into FI as Im poor so I figured Id ask you guys.

ChrisUlrich

Maybe if he had a 511ci, better heads, better intake, 93 octane + meth and twin 74mm turbos from Borg Warner. haha

Basically he's lying his *** off.

TAEnvy

iTrader: (2)

I knew it. He talks alot of **** and I always figured he was lying cause sometimes it comes threw and finally the other day he said something really ******* off the wall btu I didnt want to call him out on it til I did some research.

Tiago

iTrader: (27)

lol, well the combination is deffinately capable of it, I don't know about 93 oct though

TAEnvy

iTrader: (2)

So tiago you think it is capable of it. What kind of PSI would be needed

TAEnvy

iTrader: (2)

Oh and just to clarify its not a stock Lq9 he said "its a 6.0 truck block bored and stroked."

Tiago

iTrader: (27)

yea the truck block would be capable.


probably around 30 lbs of boost from 76 mm turbos.

TAEnvy

iTrader: (2)

And that definetly would require something more than just 93 octane right?
Are you talking crank or whp?

Oh and tiago have you been up in the DFW area in the last year, a while back I saw a red WS6 on cooper street and it had some pretty wheels that looked like yours and he hit and WOOOOOW, turbo spool and Boom he was gone. Me and my buddy were in amazement.

P.S. Cant wait to see what the car does at Goliad in March. I think you will rep the F-bpdy guys well and me and daniel will have some fodder for the local guys who say only Supras and Vipers are good for the 200+ club

Got Me SOM

iTrader: (2)

You don't believe everything someone says at first do you?

TAEnvy

iTrader: (2)

No but I didnt want to call him out on it and look like a dumbass especially with my limited FI knowledge especially on stuff like thise realy high hp builds.

njc.corp

Why not-maybe-

would need a lot of boost-i doubt pump gas-

pump gas???????????????????

TAEnvy

iTrader: (2)

Doesnt the 1500ft lbs seem a little off?

Inspector12

iTrader: (29)

Seems like nice round numbers so I am assuming he is just rounding everything off and UP LOL! Speed inc. Made the 1265rwhp on like 23lbs so I would guess he needs a solid 5+ lbs of boost to get near the number, assuming everything is relatively close in eff.

427

iTrader: (3)

HP is almost always higher than torque in a gas engine. To make 1400hp with 1500ft lbs, the engine rpm would be just under 5000rpm.


Kurt

FootLbs

iTrader: (7)

^^^ This is true. Maybe he converted it to diesel!!

Though, my car makes more torque than HP but it's nitrous. . .