finally got to get a dyno reading.....
Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
finally got to get a dyno reading..... here is a short vid of the run.....
http://s44.photobucket.com/albums/f3...t=100_0434.flv
when the car was dynoed before it kept spinning on the rollers...with this dyno we were able to strap it down pretty well.....the car made 898.3 rwhp and 779.5 rwtq on 93 octane and 6-7 psi....I am very happy to say the least....I'm trying to post the dyno sheet but I'm having a problem doing it....
http://s44.photobucket.com/albums/f3...t=100_0434.flv
when the car was dynoed before it kept spinning on the rollers...with this dyno we were able to strap it down pretty well.....the car made 898.3 rwhp and 779.5 rwtq on 93 octane and 6-7 psi....I am very happy to say the least....I'm trying to post the dyno sheet but I'm having a problem doing it....
Banned
Joined: Oct 2007
Posts: 240
Likes: 0
From: Marysville/Manhattan, Ks
Trending Topics
Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
not real sure dr turbo on the complete specs, the turbo company I went with contacted garrett and ordered for me a gt-4508r and for whatever reason it works well with my set-up...I have a 16 psi tune that I haven't tried out yet because the dyno is only rated to 900rwhp....I would like to see how much power the 16 psi would make....
Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
lol...we had a few guys there that didn't believe it and they stood by the car and watched the gauge...the waste gate has a 6 psi spring in it, but once you first hit the throttle the boost will creep alittle to 7 psi then settle down to 6 psi for the rest of the pull which is 7000rpm....
Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
Nice numbers! 
Thread Starter
Launching!
Joined: Apr 2007
Posts: 279
Likes: 0
From: lynchburg va
I think the shop that I used has already sold my set-up, just because I have seen a set-up exactly like mine, even the same turbo and cam but it's all good...
