Trans Am intercooler size
Thread Starter
8 Second Club
iTrader: (40)
Joined: Aug 2005
Posts: 1,861
Likes: 0
From: Raleigh,North Carolina
Trans Am intercooler size Can someone measure the distance between the foglights on the LS1 TA front bumper cover. Need to know how wide I can make the heat exchanger for the H2O to air. My car is about 1500 miles away. Thanks.
my i/c is 33x12x4
i cut most everything off the fog light brackets and attached them directly to the i/c with velcro....yes velcro and nobody has ever known. I take them out at the track in the summer for a little more airflow to the i/c. I dont like the way the front looks without the fog lights which is why i did it that way
i cut most everything off the fog light brackets and attached them directly to the i/c with velcro....yes velcro and nobody has ever known. I take them out at the track in the summer for a little more airflow to the i/c. I dont like the way the front looks without the fog lights which is why i did it that way
my i/c is 33x12x4
i cut most everything off the fog light brackets and attached them directly to the i/c with velcro....yes velcro and nobody has ever known. I take them out at the track in the summer for a little more airflow to the i/c. I dont like the way the front looks without the fog lights which is why i did it that way
i cut most everything off the fog light brackets and attached them directly to the i/c with velcro....yes velcro and nobody has ever known. I take them out at the track in the summer for a little more airflow to the i/c. I dont like the way the front looks without the fog lights which is why i did it that way
What IC did you go with? OFI one is smaller 22x12x4, been thinking of getting a bigger one myself.
intercooler here is a pic of mine, I believe it is a 24, all i know is i had to do v bands and tight 90's.
https://ls1tech.com/forums/forced-induction/747523-f1a-ls2-402-build-progress-pics-inside.html
https://ls1tech.com/forums/forced-induction/747523-f1a-ls2-402-build-progress-pics-inside.html
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 Second Club
iTrader: (40)
Joined: Aug 2005
Posts: 1,861
Likes: 0
From: Raleigh,North Carolina
This is going to be the heat exchanger for the water to air intercooler, not an air to air. The actual IC will be mounted inside. So I figure the heat exchanger can be 30" x 7"-8" or so. That should provide plenty of surface area.
