APS car overheating
#41
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The Ron Davis radiators are some of the best, we have had great success with them.
http://www.exoticperformanceplus.com...html?item=1228 Bob
http://www.exoticperformanceplus.com...html?item=1228 Bob
#42
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Fairview NC (near Charlotte)
Posts: 717
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
DROP THE TALK ABOUT STS IN THIS THREAD or it will be removed.
-MODERATOR
for your overheating problem if it was me i would move the intercooler, i am not a big fan of putting it by the radiator, i learned my lesson with the tti street kit, i had horrible IAT temps and it ran kindof hot.
since you have an iron block those are a bit harder to cool, so you need as much air as possible going to the radiator.
sure it looks nice and factory like, but your IAT temps will be higher then the need to be and your car is going to run hot.
-MODERATOR
for your overheating problem if it was me i would move the intercooler, i am not a big fan of putting it by the radiator, i learned my lesson with the tti street kit, i had horrible IAT temps and it ran kindof hot.
since you have an iron block those are a bit harder to cool, so you need as much air as possible going to the radiator.
sure it looks nice and factory like, but your IAT temps will be higher then the need to be and your car is going to run hot.
I have a LS2 block and I am thinking of moving the intercooler to the front but my thinking is the kit should work as it is. I wonder how much heat the watercooled turbos are adding to the system
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Barf](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_barf.gif)
#43
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Fairview NC (near Charlotte)
Posts: 717
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i think hes the only one of us running an iron block which could be contributing to his issue. i dont have any issues with it running hot (stock radiator, stock thermostat, stock water pump) but i havent run it with the A/C on yet in 98* weather either so i cant be positive i wont also.
and Keliente is having the same problems but not quite as bad. She is stock CI and 317 heads with a small cam
#45
#47
TECH Veteran
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think edelbrock is also making a better waterpump now for our cars.That might help also. I want to know what rad to get that will fit like stock one don't think there is that much room in there for deeper with the intercooler and stuff?? Also can a person put a pusher fan in front maybe? And you already said you were running water wetter. Are you fans for sure coming on?
#48
#50
12 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After 9,000 miles on my APS set-up, I finally ran my car in the hot weather last weekend with AC and it did start to get hot on me. It ran warmer than usual but stayed put on the roadtrip to Norwalk, Ohio for Pinks All Out. Friday on the way back to the hotel with 4 people in the it started to get a lot hotter in traffic (with A/C). I was thinking about looking into improving the shrouds that block the air on the sides of the heat exchangers. It seems like there is nothing keeping air from exiting the sides of the radiator versus being forced through it. But I am also wondering if a larger radiator is needed now. The car has no problems below 90 degrees but on the hot days it seems to struggle to maintain temps.
I have the 160 thermostat, stock waterpump (no underdrive pulleys) and am running the dexcool/water mix. I did have to burp my system a lot after I got it all back together last fall and still check it once in a while as it seems low now and then.
I did play around with it in the hot weather last weekend and it ran hot just cruising in traffic, or after some wide open throttle blasts in 1st & 2nd gear. The temps stayed the same, which was good. But still hotter than it ran in the cooler weather. I will be watching this thread to see what else may need to happen as I want to keep my car a fun and reliable DD.
I have the 160 thermostat, stock waterpump (no underdrive pulleys) and am running the dexcool/water mix. I did have to burp my system a lot after I got it all back together last fall and still check it once in a while as it seems low now and then.
I did play around with it in the hot weather last weekend and it ran hot just cruising in traffic, or after some wide open throttle blasts in 1st & 2nd gear. The temps stayed the same, which was good. But still hotter than it ran in the cooler weather. I will be watching this thread to see what else may need to happen as I want to keep my car a fun and reliable DD.
#51
Banned
iTrader: (9)
Join Date: Nov 2006
Location: Iowa
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
back to the LT1 talk? will this really work will this really make a big enough difference. or should i just spend the 600 for the be cool. also do these aftermarket cools come with the tabs that hold my stock shroud on?
#57
LS1Tech Sponsor
iTrader: (65)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
unfortunately the aps kit uses that for the turbos water supply....
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic36191_1.gif)
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
![](https://ls1tech.com/forums/signaturepics/sigpic36191_1.gif)
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
#58
TECH Enthusiast
iTrader: (6)
Join Date: Jul 2002
Location: California
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have spent time logging my old PTK turbo set up and keep in mind the stock guage can be way off in regards to temp. I have seen anywhere from 8 to
14+ degrees difference from my logs to guessing where the guage is at.
Darrin, I would relo the intercooler and be done with it.
Glenn
14+ degrees difference from my logs to guessing where the guage is at.
Darrin, I would relo the intercooler and be done with it.
Glenn
#59
TECH Veteran
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Um how is he supposed to relocate the intercooler? You could try delete the intercooler and just run alc injection.Some guys do that pretty successfully.
I think a combo of stuff might be needed. Better water pump like the edelbrock one and better rad and possibly some pusher fan in front? Not sure if there is room in front for one I don't have my kit on my car yet.
160 stat,fans coming on pretty much all the time the key is on ,water wetter...all that should do the job.
Be nice if APS was still on the boards.Peter used to be on here all the time and lately have not seen him at all. Would like his feedback on this stuff. Would like to know if the standard intake tubes have upgraded versions ready to buy yet. Maybe should be emailing APS directly the time difference for direct talking can be annoying.
I think a combo of stuff might be needed. Better water pump like the edelbrock one and better rad and possibly some pusher fan in front? Not sure if there is room in front for one I don't have my kit on my car yet.
160 stat,fans coming on pretty much all the time the key is on ,water wetter...all that should do the job.
Be nice if APS was still on the boards.Peter used to be on here all the time and lately have not seen him at all. Would like his feedback on this stuff. Would like to know if the standard intake tubes have upgraded versions ready to buy yet. Maybe should be emailing APS directly the time difference for direct talking can be annoying.