VIDEO of Superchargered F-Body by MTI Racing
#101
i'm not trying to defend the guy here, yea he has been on here quite afew times and could have posted answers but if someone is really serious about buy why not call? i would rather talk to someone in person and feel them out on there product than over a message board
#102
Maggie F-body
Thank your patience. Our business has been swamped. As you can see from our website we engineer and install a great number of high-tech products. The design of our Maggie kit for F-body has worked so well on the stock engine, that we are looking forward to see what lies ahead after several builds on modified engines.
We appreciate your questions, and apologize that we are not on this thread as fast as the questions are coming in.
BILLS question regarding spacers- We use large billett aluminum spacers.
SOUL CRUSHER question re bigger one with lower crossmember- That is to be determined at a later date.
BRNTWS6 and THE ALCHEMIST - question cutting of cowl and posting with pictures. Okay, I can do that. We are developing the instructions as we install the 1st ten kits. This is so you, as a buyer have the clearest, no-brainer guidance to follow. I will have picture of cut cowl by Monday afternoon.
KILLER_Z - Tuning is done. Runs great! We haven't done burnout videos yet, but I'll get the camera and try some in front of our building.
PROCHARGEDSS - Regarding LQ9 heads - We have only installed on a stock LS1 head. The interchangeability of the LQ9 as well as other heads should work just the same.
RAPTOR_WS6 - regarding the MAF, or no MAF. - The answer is no MAF.
Once again, I appreciate your patience. If our business was open at 2am, I could respond to some of your posts instantly. But please understand that we genuinely welcome your phone call during business hours so we can answer your questions directly.
We appreciate your questions, and apologize that we are not on this thread as fast as the questions are coming in.
BILLS question regarding spacers- We use large billett aluminum spacers.
SOUL CRUSHER question re bigger one with lower crossmember- That is to be determined at a later date.
BRNTWS6 and THE ALCHEMIST - question cutting of cowl and posting with pictures. Okay, I can do that. We are developing the instructions as we install the 1st ten kits. This is so you, as a buyer have the clearest, no-brainer guidance to follow. I will have picture of cut cowl by Monday afternoon.
KILLER_Z - Tuning is done. Runs great! We haven't done burnout videos yet, but I'll get the camera and try some in front of our building.
PROCHARGEDSS - Regarding LQ9 heads - We have only installed on a stock LS1 head. The interchangeability of the LQ9 as well as other heads should work just the same.
RAPTOR_WS6 - regarding the MAF, or no MAF. - The answer is no MAF.
Once again, I appreciate your patience. If our business was open at 2am, I could respond to some of your posts instantly. But please understand that we genuinely welcome your phone call during business hours so we can answer your questions directly.
#104
It will take some costom fabwork to get a maf in the small amount of space on a fbody. The adapter and tbody take up all avaiable space.
Stephen you didnt answer my ?.
Btw my car is local if your interested to look at the install, Im in Kennesaw.
Doug
Stephen you didnt answer my ?.
Btw my car is local if your interested to look at the install, Im in Kennesaw.
Doug
#105
Teching In
Join Date: Jan 2008
Location: Montrose, MN.
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
What are yall using to cool the charge air? I had a maggie on my gto with the air to liquid front mount and it was ok till it warmed up and I'm not talkin bout hot lappin, I'm talkin bout daily driving. When it was up to normal driving temp it was heat soaked and you could feel a seet of the pants power loss. Your kit does look great by the way...
#106
Teching In
Join Date: Jan 2008
Location: Montrose, MN.
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
485 wheel 04 gto under 3k
Wait, you can get into the high 400s at the wheels for less then 6k? Granted it is 8k if they do the install too but I am assuming that you'd be doing the installs yourself (be it supercharger or heads/cam). I haven't seen any car here spend less and get the same results. Wouldn't your reason for saying it'd sell like crazy if it was 3k would be that 3k for mid-high 400rwph would be an insanely good deal. Sry bout off being off topic.
No matter though, I think it looks awesome. Given I had the money, I wouldn't even have to think about it. To MTI, anything you can add about fueling on the car above? Was the stock fuelpump/injectors enough to feed that power level?
No matter though, I think it looks awesome. Given I had the money, I wouldn't even have to think about it. To MTI, anything you can add about fueling on the car above? Was the stock fuelpump/injectors enough to feed that power level?
Last edited by chvyboyls1; 07-12-2008 at 01:01 AM. Reason: added more
#108
My 04 gto made 485 hp and 560 tq on a 125 plate shot. 325 hp 324 tq all motor. Paccetter long tubes, one off 3" catless header back with 10" kooks bullets, HSW ls1 plate kit, self ported and polished T B, K&N cold air, and an EXCELLANT tune from Jesse at the horse power house in Bowling green KY. All new parts for under 3 k.
W/ a maggie you can pretty much count on gaining 160 hp over what you would normally be n/a.
Doug
#109
Teching In
Join Date: Jan 2008
Location: Montrose, MN.
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
That is like comparing apples to oranges! you dont have 485 all the time only when your bottle is on. If I spray 125 om my maggie I'll be at 630. you also have to pay 30.00+- at a time to refill bottle. if you go through a bottle a week, In two years you will have spent 3k in spray. I have the power w/o spending 30+ $ a week.
W/ a maggie you can pretty much count on gaining 160 hp over what you would normally be n/a.
Doug
W/ a maggie you can pretty much count on gaining 160 hp over what you would normally be n/a.
Doug
#110
My point was that no you cant, For 3k you get it part time and for 6k you get it all the time.
For my 6k even at part throttle i get 450 rwt all the time.
How can you be happy w/ a 150 shot but not be happy w/ full time 150?
You are right about taking headers and exhaust to get 500 but you didn't get 500 w a 150 shot w/ the same mods.
Even a procharger at those boost levels wont net you any more hp and less torque down low. Now I'm not trying to start a centri vs maggie war, Just to say they both have their place.
Maggie = Street ,some strip
Centri = some street ,more strip.
Doug
For my 6k even at part throttle i get 450 rwt all the time.
How can you be happy w/ a 150 shot but not be happy w/ full time 150?
You are right about taking headers and exhaust to get 500 but you didn't get 500 w a 150 shot w/ the same mods.
Even a procharger at those boost levels wont net you any more hp and less torque down low. Now I'm not trying to start a centri vs maggie war, Just to say they both have their place.
Maggie = Street ,some strip
Centri = some street ,more strip.
Doug
#111
11 Second Club
iTrader: (11)
Join Date: Oct 2004
Location: Pewaukee Wisconsin
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Have the same kit only from LM speed.
Let it speak for its self......
http://videos.streetfire.net/video/S...-at_133430.htm
Here is a picture of the spacer needed
Heres the cowl that gets cut
And it did more than what i expected. As far as I know I still have the highest numbers out of a f-body for right now.....
Let it speak for its self......
http://videos.streetfire.net/video/S...-at_133430.htm
Here is a picture of the spacer needed
Heres the cowl that gets cut
And it did more than what i expected. As far as I know I still have the highest numbers out of a f-body for right now.....
#114
TECH Cry Baby BOSS APPROVED!
iTrader: (5)
My 04 gto made 485 hp and 560 tq on a 125 plate shot. 325 hp 324 tq all motor. Paccetter long tubes, one off 3" catless header back with 10" kooks bullets, HSW ls1 plate kit, self ported and polished T B, K&N cold air, and an EXCELLANT tune from Jesse at the horse power house in Bowling green KY. All new parts for under 3 k.
#117
There are a couple of guys on the corvette forums making 700+ on 400+ ci motors and some guys making 600+ on a 347. It is like anything else horse power = money. Every one knows you can only go so far (safely) on a stock motor. W/ a 347,some AFR 225s,A big cam,Alchy( for safety on 93),and some good tuning I dont see a problem w/ 650 rwhp. The point still remains this is not the BEST setup for drag racing but for the street its pretty friggin awesome. Besides your not gonna hook up 600 hp on the street anyway.
Doug
Doug
#120
For a drag racing application is there something better...absolutely! For a street car probably not? contrary to popular belief most of the guys on this forum dont go to the track more than 2 or 3 times a season. They just want a fast street car and this is IMO the best way to go.
If you want to bitch about the price look at it this way, If you have a fast intake now you will save about 1200.00 because you will no longer need it. If you have an ls6 you'll save about 400.00 If you already have an upgraded fuel system and can tune yourself you will be able to save a lot more.For all you get w/ this kit it is a damn good deal.
Doug