10 bolt with LPW Girdle & Axle Tube Brace
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Installed with pics, didn't cost much so we will see how time will tell..
Blew my carrier up a few weeks ago, got a used one on here cheap + LPW Ultimate Girdle & Axle tube brace kit for the 10 bolt. Had to have the the drivers side brace cut since it didn't fit and requires some welding for brackets. Pics below.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/551758_10151105785029278_783249277_13632041_365816087_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/579886_10151105785159278_783249277_13632043_400775641_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/s720x720/533044_10151105785249278_783249277_13632044_384463596_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/s720x720/550505_10151105785379278_783249277_13632046_153123529_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/580039_10151105785534278_783249277_13632047_1336829732_n.jpg)
Blew my carrier up a few weeks ago, got a used one on here cheap + LPW Ultimate Girdle & Axle tube brace kit for the 10 bolt. Had to have the the drivers side brace cut since it didn't fit and requires some welding for brackets. Pics below.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/551758_10151105785029278_783249277_13632041_365816087_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/579886_10151105785159278_783249277_13632043_400775641_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/s720x720/533044_10151105785249278_783249277_13632044_384463596_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/s720x720/550505_10151105785379278_783249277_13632046_153123529_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/580039_10151105785534278_783249277_13632047_1336829732_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/s720x720/579270_10151105785629278_783249277_13632048_1686461855_n.jpg)
Last edited by fccs; 05-11-2012 at 06:26 PM.
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had a choice of either spending like $2000-$2500 for a 12bolt or 9inch with posi and everything I wanted.. or spending like $300 to rebuild the 10 bolt and also slap a girdle and this brace on it. I only go to the track sometimes, not often, so I went the $300 way.. lol
#5
TECH Apprentice
iTrader: (16)
Join Date: Jan 2011
Location: Central Ohio
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am interested in this idea as well. I saw it first here http://www.thirdgen.org/techboard/tr...f-10-bolt.html, but he put in 2.73 gears for extra strength, which I am not about to do on a NA car with a 6spd. Talk about being a dog off the line.
Only time will tell how it holds up. Please keep us updated and let us know if it blows up, lol. Subscribed!
Only time will tell how it holds up. Please keep us updated and let us know if it blows up, lol. Subscribed!
#7
12 Second Club
iTrader: (116)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm also seriously considering this. I have a set of 3.73's sitting under my desk & was gonna have my rear freshened up when I do my auto swap. With the auto already being nicer to the 10-bolt than the T56, this extra support on the caps & axle tubes might just be a cost effective route for the 10-bolt as long as people dont expect to strap on a 28" slick & hammer it at the track off the transbrake, LOL
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea by no means would I say this makes the 10 bolt drag radial ready for the strip but I would say it makes it reliable enough for street tires. Some people including me have broken the rear end on street tires before, this I think would fix most of that. It's cheap and can easily sell the parts if you do break the rear anyways lol.
#9
TECH Fanatic
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have just the LPW cover on the Trans Am, which has seen probably a dozen high 1.4 to low 1.5 60' Stock diff, Motive 3.73, and a solid pinion spacer.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
#10
TECH Apprentice
iTrader: (16)
Join Date: Jan 2011
Location: Central Ohio
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have just the LPW cover on the Trans Am, which has seen probably a dozen high 1.4 to low 1.5 60' Stock diff, Motive 3.73, and a solid pinion spacer.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
#11
12 Second Club
iTrader: (116)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea by no means would I say this makes the 10 bolt drag radial ready for the strip but I would say it makes it reliable enough for street tires. Some people including me have broken the rear end on street tires before, this I think would fix most of that. It's cheap and can easily sell the parts if you do break the rear anyways lol.
Auto cars are alot more forgiving on these little 10-bolts. You can actually make one live for quite a while with minor upgrades as long as its behind a auto car & your not running full slicks. Drag radials should be a problem though.
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have just the LPW cover on the Trans Am, which has seen probably a dozen high 1.4 to low 1.5 60' Stock diff, Motive 3.73, and a solid pinion spacer.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
I have the LPW cover and tube brace kit on my Z28, installed in 2002. Stock 3.42 rear from a 2002 TA with welded tubes. Followed the old "ultimate 10 bolt" build. Possibly hundreds of 1.6x 60' and over a decade of street abuse.
Both cars use drag radials.
IMO there is no better cover for these rears. The popular other brands don't support the rear properly.
Why did you have to cut the tubes? They make (or at least used to make) several versions of the kit, including one specifically for the 82+ F-bodies.
Last edited by fccs; 05-11-2012 at 06:28 PM.
#13
TECH Fanatic
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
FWIW - the Z28 is in the middle of an L33 swap with a 76mm turbo. Expecting high nines in the mid 130s, and have no plans to touch the 10 bolt.
And I hate to say it, but to anyone that's broken a 10 bolt in a near stock car, street tires or not, they'e doing something VERY wrong. They're often the same people that spend $3000 on a 12 bolt or 9" and end up breaking them too.
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Both are autos.
FWIW - the Z28 is in the middle of an L33 swap with a 76mm turbo. Expecting high nines in the mid 130s, and have no plans to touch the 10 bolt.
And I hate to say it, but to anyone that's broken a 10 bolt in a near stock car, street tires or not, they'e doing something VERY wrong. They're often the same people that spend $3000 on a 12 bolt or 9" and end up breaking them too.
FWIW - the Z28 is in the middle of an L33 swap with a 76mm turbo. Expecting high nines in the mid 130s, and have no plans to touch the 10 bolt.
And I hate to say it, but to anyone that's broken a 10 bolt in a near stock car, street tires or not, they'e doing something VERY wrong. They're often the same people that spend $3000 on a 12 bolt or 9" and end up breaking them too.
#15
TECH Addict
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea by no means would I say this makes the 10 bolt drag radial ready for the strip but I would say it makes it reliable enough for street tires. Some people including me have broken the rear end on street tires before, this I think would fix most of that. It's cheap and can easily sell the parts if you do break the rear anyways lol.