driveshaft loop problem, help!
driveshaft loop problem, help! I just bought the Jegster driveshaft loop for the F-bods and it only looks like I can use 2 of the 4 bolts if you look at this pic you can tell that it is not as wide as the Lakewood or the SLP. Have you guys got any input?http://www.jegs.com/webapp/wcs/store...57228_-1_10061
Originally Posted by 2 fast 2000
That's right! You should be using 4 total. 2 on one side and two on the other. My BMR only uses 4 total, so you should be good.
What do you mean?
I can only get 2 bolts in not 4
the bracket on the loop don't seem wide enough.
Should I scrap this thing and get a Lakewood , or what does anyone think?
I called Jegs tech support on this and they seem as sharp and a butter knife.
USELESS
By looking at the link, does it look like it will only fit a 82-92 or what?
Last edited by LS1NUT26; Aug 31, 2007 at 09:53 PM.
well if they are all the same, how come it won't line up right?
Like I said, by looking at the jegster one vs. the lakewood one the spacing between
the two bolt holes on both sides are about an inch and a half off.
any feedback on this?
Like I said, by looking at the jegster one vs. the lakewood one the spacing between
the two bolt holes on both sides are about an inch and a half off.
any feedback on this?
Trending Topics
I guess the jegster one sucks? lol
I looked and Lakewood sells one for 82-92 and 93-02...
I can get you the lakewood one for $50.99 plus tax...that's $1 cheaper than Jegs
plus you don't have to pay they're shipping and handling or whatever!
I looked and Lakewood sells one for 82-92 and 93-02...
I can get you the lakewood one for $50.99 plus tax...that's $1 cheaper than Jegs
plus you don't have to pay they're shipping and handling or whatever!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by LS1BADZ
I guess the jegster one sucks? lol
I looked and Lakewood sells one for 82-92 and 93-02...
I can get you the lakewood one for $50.99 plus tax...that's $1 cheaper than Jegs
plus you don't have to pay they're shipping and handling or whatever!
I looked and Lakewood sells one for 82-92 and 93-02...
I can get you the lakewood one for $50.99 plus tax...that's $1 cheaper than Jegs
plus you don't have to pay they're shipping and handling or whatever!
Got a PM from someone selling an SLP D/L for $50.00
might go with that.
um that says 1982-2002. I might be wrong but I think the body changed in 1993? Not sure if 98-02 is even the same as 93-97? anyways I think you're right, those bolt holes don't look as far apart as it needs to be. Don't know what the SLP is like but I bought the lakewood for my 98 Z28 and I love it. It fits really tight to the tunnel, and it goes up and over the exhaust instead of down under, so I know it's not going to make me lose ground clearance. My UMI brace dragged a lot and at stock height! the only grudge against the lakewood is that the driveshaft weight is freakishly close to the loop, but I have a few thousand miles on it and no problems yet, not even little taps against each other 
