Champion camaro ttix 848 rwhp
#1
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Champion camaro ttix 848 rwhp
Just finished re-tuning Dimetri's 2010 Camaro. Motor is completely stock except for a valve spring change and flow master mufflers. Pump gas and meth. 16lbs of boost. 14 degrees of timing. Customer wanted the 800+ dyno,but will run lower boost on the street.
#2
On The Tree
Happy to see the numbers although that is a time bomb
#3
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#13
I dont about that. Kenny bell did testing and the factory rods bend everytime at 13psi...I just dont see the stock motor holding 16psi
Last edited by BLACK MAMBA10; 11-04-2011 at 06:08 PM.
#14
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
The customer reported back to us that the motor is still running strong, he has been running many 1000cc bikes roll racing and beating them. Only one problem he can't run the car at low boost because it feels to slow, he's now running @ 17lbs. Customer planning to build forged motor over winter. We have another customer with a ls2 and stock 317 heads running 21lbs completely stock bottom end. Three years hard beatings 740 rwhp.
#20
Just finished re-tuning Dimetri's 2010 Camaro. Motor is completely stock except for a valve spring change and flow master mufflers. Pump gas and meth. 16lbs of boost. 14 degrees of timing. motorfiend blue hid wanted the 800+ dyno,but will run lower boost on the street.