LS won't rev. Please help!!!
Thread Starter
Teching In
Joined: Mar 2014
Posts: 3
Likes: 0
LS won't rev. Please help!!! Starts and runs great until I hit the gas. If you hold the throttle with steady pressure it revs to about 1340 rpms then it shuts off the injectors until about 950 rpms. Sounds just like a rev limiter, but way lower rpms.
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
10 Second Club
Joined: Jul 2008
Posts: 224
Likes: 0
From: Columbus Ohio
Reach around behind the intake and check the MAP sensor, make sure it's plugged in electrically and plugged into the port on the manifold. Also make sure nothing is wrong with the MAF, as in no dirt or debris in the wires or stuck to the screen. Someone with a good scan tool should be able to look at live data and get a good idea what values the ECM is seeing and causing the trouble. Good luck, I hope you can figure it out. If you were around central Ohio I wouldn't mind helping out I like solving these types of issues.
Starts and runs great until I hit the gas. If you hold the throttle with steady pressure it revs to about 1340 rpms then it shuts off the injectors until about 950 rpms. Sounds just like a rev limiter, but way lower rpms.
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
**** missed that part, it's late
My car had a similar issue and it was the intake air temperature sensor being broken and the ECM reading -256 degrees and throwing tons of fuel and timing in the motor which eventually killed my pump
My car had a similar issue and it was the intake air temperature sensor being broken and the ECM reading -256 degrees and throwing tons of fuel and timing in the motor which eventually killed my pump
Starts and runs great until I hit the gas. If you hold the throttle with steady pressure it revs to about 1340 rpms then it shuts off the injectors until about 950 rpms. Sounds just like a rev limiter, but way lower rpms.
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
Motor is 2006 LS2. Intake, ECM& harness are 01-02
Confirmed the motor is a 24x-4x crank and a 1x cam.
Fuel pressure is good
All sensors look like they are working on the lab scope
ECM has all security deleted and is stand alone
Even installed the ECM into a friends 00 pick-up and it works fine.
Confirmed when it does this the spark is still good.
The crank and cam are matching up on the lab scope.
It will rev if you leave tps plugged in but disconnected from throttle body and manually set at zero. If it has any voltage it won't rev.
BTW I am NOT a mechanic so if anyone has any ideas please talk slow and in terms a third grader would understand.
I gave up and took it to a mechanic, now he is ready to give up.
Please help!
.
Trending Topics
Thread Starter
Teching In
Joined: Mar 2014
Posts: 3
Likes: 0
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
