New Edelbrock LSx Intake Manifold at SEMA, claiming much more power than FAST
#301
UNDER PRESSURE MOD
iTrader: (19)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well there you have it, I doubt it's going to fit on any factory vehicle that came with an ls1 due to either the height in the rear, or the height of the throttle body.
It's a shame, because it looks like it might perform well and have the good reputation that Edelbrock has for QC.
It's a shame, because it looks like it might perform well and have the good reputation that Edelbrock has for QC.
#306
Banned
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As of this afternoon, Edelbrock is conducting "product evaluation" on the LS-XT intake. In other words they're checking to make sure the castings are defect free and that the machining is following the blueprints they specd. It will take a week or two for this process I'm told. I honestly don't anticipate this manifold to be in high volume production for at least another 6-8 weeks. Just my guess, and I hope I'm wrong but that's the impression I get. They only have one chance to get it right for "the first time release" of this new part. I believe they're doing their typical high quality QC so there aren't any "suprises" after it is released.
Richard
Richard
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#307
TECH Addict
iTrader: (19)
Join Date: Mar 2006
Location: Owings, Md
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As of this afternoon, Edelbrock is conducting "product evaluation" on the LS-XT intake. In other words they're checking to make sure the castings are defect free and that the machining is following the blueprints they specd. It will take a week or two for this process I'm told. I honestly don't anticipate this manifold to be in high volume production for at least another 6-8 weeks. Just my guess, and I hope I'm wrong but that's the impression I get. They only have one chance to get it right for "the first time release" of this new part. I believe they're doing their typical high quality QC so there aren't any "suprises" after it is released.
Richard![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Richard
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#311
TECH Junkie
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
that's freakin great....
and where was THAT info when they first released info about it? or the 2nd release...or 3rd...or...what release are we up to now??
glad i jumped on the ported FAST last month....all ported and ready to go on with a before/after dyno tune to show the gains.
and where was THAT info when they first released info about it? or the 2nd release...or 3rd...or...what release are we up to now??
glad i jumped on the ported FAST last month....all ported and ready to go on with a before/after dyno tune to show the gains.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#316
Staging Lane
Join Date: Oct 2008
Location: on the edge
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It should fit trucks, and possibly the GTO with a cowl hood and no strut brace.
I do believe they had more of the retrofit guys in mind.
I wouldn't be suprised to see a LSX crate motor from Edlbrock sporting it either.
I'm thinkin' it would look good on my Silverado, just have to see how it does down low first. It may kill too much low end for a tow vehicle though.
I do believe they had more of the retrofit guys in mind.
I wouldn't be suprised to see a LSX crate motor from Edlbrock sporting it either.
I'm thinkin' it would look good on my Silverado, just have to see how it does down low first. It may kill too much low end for a tow vehicle though.
#317
On The Tree
iTrader: (8)
Join Date: Apr 2003
Location: NJ
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yep. And another plus is that it looks like it will work with 5.3 truck accessories. That's a big plus for me, as my '69 Camaro has a 5.3L truck motor and my options for a "pretty" intake are fairly limited without changing the accessories.
#319
On The Tree
iTrader: (1)
Join Date: Jul 2008
Location: Greenville, NC
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
this pisses me off... since the day i first read about this intake coming out, ive had high hopes to buy one. Now this ****?? F-body's and mustangs are the most popular modified cars on the road and they're making a product for lsx motor's THAT WONT FIT A ******* F-BODY! Great marketing *** holes!
#320
TECH Junkie
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
this pisses me off... since the day i first read about this intake coming out, ive had high hopes to buy one. Now this ****?? F-body's and mustangs are the most popular modified cars on the road and they're making a product for lsx motor's THAT WONT FIT A ******* F-BODY! Great marketing *** holes!
Why do they have to think of the fbody with every thing they sell? Go buy the fast or a ls6 intake, They are great.
I am running the 6.0 intake on my Nova , This will replace it when it is released. I will keep the fast on my Trans AM