Weiand LS1 Intake?...
Weiand LS1 Intake?... My buddy came across what seems to be a steel or iron LS1 intake manifold made by Weiand. The stamped numbers read 80205. Anyone know where this intake falls vs. the LSX and LS6 intake manifolds? Is it even compatible with an LS1 engine?
Thanks!
Thanks!
It could be aluminum I suppose. It's totally cast metal whatever it is and damn heavy for an intake manifold. It's about the same weight as an aluminum head so I suppose it could be aluminum...derr dee derr lol
if you read about lsx intakes on this site, the consensus is anything other than ls6 or fast90 = fail.
its been proven that the ls6 intake makes as much power as any other aftermarket intake except the fast 90.
im waiting to see real non biased dyno numbers on the weiand warrior. as of right now not one person can say the warrior is good or bad, there is no proven info on it yet.
its been proven that the ls6 intake makes as much power as any other aftermarket intake except the fast 90.
im waiting to see real non biased dyno numbers on the weiand warrior. as of right now not one person can say the warrior is good or bad, there is no proven info on it yet.
Trending Topics
For a cheap good LS1 replacement that you will see gains from just go LS6. If your pockets are deeper then you have several choices on the market. Expecially if your gonna run 7k RPM's & up cause the FAST will run outta breath.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I sold my ls6 intake for a polished holley/weiand intake. I did it mainly cause it is polished and I was going with all black exterior and polished/chrome under the hood. Mine has been ported so it works out pretty good. Good intake for nitrous I hear. Don't worry about heat soak bs you will get. If anything I gained hp not lost.
Teching In
Joined: Nov 2008
Posts: 6
Likes: 0
From: lithia springs, ga
ok, will the weiand intake give as much hp gain as the ls6 and do you need a throttle plate for it? im trying to find the best intake for the ls1 im building, im using the ms3 cam, port and polished ls1 heads, and goin with pac setter headers
Teching In
Joined: Feb 2010
Posts: 23
Likes: 0
