ls1 400whp with bolt on's ?
#21
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2009
Location: Houston, TX
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
what isn't exactly bolted on to your car???? haha and i made 334 with just lt's and ory NO tune, im sure with a tune and intake i'd max out at about 370...
#26
11 Second Club
iTrader: (8)
Join Date: Aug 2005
Location: Pasadena, CA
Posts: 2,451
Likes: 0
Received 0 Likes
on
0 Posts
Its probably not worth it if you think about it.. some routes may just be cheaper and yet more beneficial...
You can spend $3000 overall and make 420rwhp or you cna spend $5000 and barely push 400rwhp.. It depends on what you wanna do and what your goals are.
#27
Captain Double Post
iTrader: (2)
I know some place sells a generation x bolt on package that says 400 hp ,had a friend call them to ask how much it was and the guy said 9 grand lol, just do a cam and call it a day your gonna spend way more trying to get hp that isn't there then if you just got a cam kit from tsp I think there kit with single springs is 589, or you can go buy a 650 dollar water pump and a 200 dollar maf that wil do nothing but look good under your hood,400hp bolt on car would perform like 370 hp bolt on car,if you do get 400 outta bolt ons make sure you get a 400 hp slp badge that would let everyone know you mean buisness lol,we all know slp's numbers are truth lmfao
#28
I know some place sells a generation x bolt on package that says 400 hp ,had a friend call them to ask how much it was and the guy said 9 grand lol, just do a cam and call it a day your gonna spend way more trying to get hp that isn't there then if you just got a cam kit from tsp I think there kit with single springs is 589, or you can go buy a 650 dollar water pump and a 200 dollar maf that wil do nothing but look good under your hood,400hp bolt on car would perform like 370 hp bolt on car,if you do get 400 outta bolt ons make sure you get a 400 hp slp badge that would let everyone know you mean buisness lol,we all know slp's numbers are truth lmfao
#29
TECH Addict
iTrader: (2)
That is not what SLP thinks:
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
Last edited by libertyforall1776; 09-14-2010 at 02:04 PM.
#31
12 Second Club
iTrader: (10)
Join Date: Jan 2007
Location: Charleston, SC
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
wow i made 371wrhp/372rwtq (M6, 3.42s, 10 bolt) with SLP lid, bellow, ported MAF, stock TB, LS6 intake, Pacesetter 1 3/4 LT's, ORY, a cutout, and a 220/224 .530/.534 112 cam. i know i wasn't maxed out on bolt-ons but something tells me my old motor was slow...i wonder if 127k miles helped...
anyways, not to hijack, i think 400 rwhp is a stretch on bolt-ons. sounds like a fun game to play if you have the money, but 400 rwhp, like others said, can be had for a whole lot cheaper with a cam.
anyways, not to hijack, i think 400 rwhp is a stretch on bolt-ons. sounds like a fun game to play if you have the money, but 400 rwhp, like others said, can be had for a whole lot cheaper with a cam.
#33
That is not what SLP thinks:
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
#34
TECH Enthusiast
iTrader: (6)
chrs1313 ram air, largest air lid you can get (100mm?), K&N filter (doubtful but might help a little), speed density (no MAF), 102mm throttle body (can you port those?), ported 102mm FAST with FAST fuel rails, ARH 1 7/8" long tubes into an open x-pipe, underdrive pulley, electric water pump, dyno tuned running on 93 octane with no ethanol (we some have ethanol free available around here). I don't know, think it would be possible then? I think probably not, because even though that would be extremely free flowing for an LS1, you'd still need a head/cam package to take advantage of all those mods to suck more air in and burn more fuel and spit it out.
Or, do all that except tune it to run on E85. Not sure how much power that gains you since I don't know anything about it though, since that is not available anywhere near me.
Oh, and of course "SLP stage 3 400hp fender badges"
Or, do all that except tune it to run on E85. Not sure how much power that gains you since I don't know anything about it though, since that is not available anywhere near me.
Oh, and of course "SLP stage 3 400hp fender badges"
#37
That's MISTER MODERATOR
iTrader: (9)
That is not what SLP thinks:
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
http://www.hawksthirdgenparts.com/pe...tips400hp.aspx
Note the included 1.85-Ratio Rocker Arms w/ Springs & Retainers (51185)!
Maybe all that power is from the stickers
#39
I would say something is up with that dyno or you have a freak car. Full bolt on ls1 cars usually dyno 340-350 in my experience. I have seen mild cam cars put down 370 but never a bolt on car.
#40
TECH Senior Member
iTrader: (26)
i wouldnt get to caught up over dyno numbers!!! See this all the time in the dyno section... guys claim thier bolton ls1's dyno 370whp and they go to the track to trap 109. Yes rockers are a bolton and have always been considered that, but look for them used... slp 1.85's are way to pricey imo. I got lucky because the original owner arleady forked out the cash for a set w/ .600 lift beehive springs. The 01-02 ls1 have a smaller lift cam than the 98-00...
http://www.smokemup.com/tech/ls1.php
http://www.smokemup.com/tech/ls1.php