finally got my true duals!!!!
Thread Starter
Teching In
Joined: Feb 2009
Posts: 39
Likes: 0
finally got my true duals!!!! I finally got my car back!!! I gave it to them with pacesetter LT's, a slp flowpac, nd a ported tb.
They fabbed up on x-pipe then had the exhaust run over the axle over the stock location. All mandrel bends it looks so clean, and my ground clearance is amazing. I got maganaflow 4x9 mufflers and no cats. It sounds awesome, i love it.
Dynoed on a landen c dyno. 353whp and 360tq.
They fabbed up on x-pipe then had the exhaust run over the axle over the stock location. All mandrel bends it looks so clean, and my ground clearance is amazing. I got maganaflow 4x9 mufflers and no cats. It sounds awesome, i love it.
Dynoed on a landen c dyno. 353whp and 360tq.
Thread Starter
Teching In
Joined: Feb 2009
Posts: 39
Likes: 0
tach it up motorsports, in new carlisle ohio (great shop!) did the work from the headers back... and those numbers are after dyno tuning it. well i brought them the car with the headers, plugs, plug wires, intake, and ported throttle body already installed and then i also jsut brought the mufflers and tips for them to use.. they charged me 1400 for an alignment, all mandrel bent exhaust, x pipe, band clamps, dyno tune, and labor to install and fab the exhaust... they cut me kind of a deal tho he said because i was the first customer he made true duals for on an f body and he used it kinda like a mock up car
overall i am very happy wiht everything its great!!
overall i am very happy wiht everything its great!!
TECH Enthusiast
Joined: Feb 2009
Posts: 661
Likes: 0
Glad to hear you are happy with your car. IMHO you overpayed for what was done. I paid 600 for header install and fabrication from headers back. It is a true dual setup w/ an h pipe all the way out back. The price I paid included mufflers and tips. A dynotune should be no more than $400 so that's a grand total of $1000 that I paid. For a header install fab work all the way back to the bumper mandrel bent tubing, mufflers, and tips plus a dynotune. Like I said I'm glad your happy but a lot of people overpay cause they don't shop around.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Teching In
Joined: Feb 2009
Posts: 39
Likes: 0
yea i'll try and get some pics and a video clip up... honestly i've never really downloaded any videos or anything so i'll see if i can figure it out lol
yea i thought i paid a little much too, but ya know i have to say everything looks absolutely perfect so i would have rather paid what i did then have paid less and got something that was poor quality, not sayin yours is at all i'm jsut sayin that at least everything turned out great since i did pay a lot
yea i thought i paid a little much too, but ya know i have to say everything looks absolutely perfect so i would have rather paid what i did then have paid less and got something that was poor quality, not sayin yours is at all i'm jsut sayin that at least everything turned out great since i did pay a lot
tach it up motorsports, in new carlisle ohio (great shop!) did the work from the headers back... and those numbers are after dyno tuning it. well i brought them the car with the headers, plugs, plug wires, intake, and ported throttle body already installed and then i also jsut brought the mufflers and tips for them to use.. they charged me 1400 for an alignment, all mandrel bent exhaust, x pipe, band clamps, dyno tune, and labor to install and fab the exhaust... they cut me kind of a deal tho he said because i was the first customer he made true duals for on an f body and he used it kinda like a mock up car
overall i am very happy wiht everything its great!!
overall i am very happy wiht everything its great!!
Thread Starter
Teching In
Joined: Feb 2009
Posts: 39
Likes: 0
yea i'll try to get pics up sometime tomorrow or wednesday.... all i have tosay is that the work looks great they did an amazing job so if your considering it and i'm not able to get pics up i'd say just go for it man there great!!
