Hawkn01

iTrader: (1)

The other car was a 427 with the 78mm version. It would have liked the 90mm version better I would think.

Matthew@thunder

There was no tuning done on the car. The only modification of any kind was the removal of the LS6 intake and the installation of the LSX. This was actually done with the car still strapped to the dyno. As we speak they are installing the same intake on a stock cube, bolt on only M6 car with an LS1 intake. We will post more results later.

Black02SS

iTrader: (36)

Thanks Thunder. Keep us posted. Nice gain Jason.

Roger White

Please post the A/F ratio.

Tally TransAm

iTrader: (17)

i know, but even with the 78mm one i would expect more than 7hp

gomer

iTrader: (13)

Slowhawk

iTrader: (12)

I was wondering if there is more if the tune was changed to help the intake.So far they look good..

Hawkn01

iTrader: (1)

Same here Slowhawk. I still haven't received a call yet. Paul said three of the 90mm versions came, but he didn't say how many 78mm versions came in.

DTSNGIT

iTrader: (4)

I was told they received six total. I was first on the list for a 90MM and gave mine up. So someone got a call courtesy of me today!

Mike

CamaroCain

iTrader: (1)

Damn boy you are going all out aren't you

Slowhawk

iTrader: (12)

They got 6 all together.1 they are ussing and they had a few that ordered them before me,so I'm the next batch from them..
The good point is I found another one that I'll be getting by the end of this week from my shop!!

Hawkn01

iTrader: (1)

Every little bit helps Lynda

Big Stick

Was the ported TB on the car for the LS6 run? Sorry if I missed that somewhere...

Paul F

iTrader: (2)

EVERYTHING was identical between runs other then the FAST intake, EVERYTHING.

Paul

Paul F

iTrader: (2)

There was no tuning done between intake swaps. The A/F ratio was near identical between the 2.


Paul

SouthFL.02.SS

Great news.

glhs379

iTrader: (1)

Thunder says 13 wheel on a stock head 346, MTI says 7 wheel on a 427?

Something is not right here? Do both companies sell these intakes, I would like to see some unbiased back to back numbers.

Also, if the fast intake introduces more air into the car for the stated hp increases, wouldn't one think that the a/f ration would change(leaner) if no changes were made between runs?

Hawkn01

iTrader: (1)

No phone call from Thunder yet, looks like I won't be getting one in this batch. Daum, they had my hopes up that I would get one in this batch.

Ozz

Hey dont freak on the small gains on the 427 as the TB is going to be the problem. I tested the TPIS modified LS6 and we got 15rwhp over the entire range. This was with their billit TB and I think we could have made more but it was a long day and I wanted to get my intake back on and go home. I expect the LSX with the 90mm TB to be in the 15-20 range.

niphilli

This is what I was thinking, it is all bout the bottleneck.

It looks like the stock ported TB does indeed flow more air than the LS6 intake can use, but it probably does not flow enough to support the new LSx intake. Jasons graph does look promising, gains were throughout the whole RPM range ~ More power everywhere!

Anyone From Thunder: Can you comment on the fitment of the intake. Did it seal well?

Anyone from MTI: How big was the cam in the 427 (how high was the peak in the RPM range? Did the intake seal well? Is it possible that the new intake does not breathe all that well up top as it does down low ~ 6000-6500?