TB voltage question..
TB volt From i remember.. dont know about closed but after 5.7v "i think" it throws a code. Are you doing the TB bumb stop mod? If so, be good to stop at 5.6 or so. If the V-meter is not accurate well.. you know "SES" 
Launching!
Joined: Mar 2003
Posts: 293
Likes: 0
From: TX.
i belive the voltages are ( closed = .5 to .6 volts, and WOT 4.6 volts )
the 4.6 volts is after the bump stop mod,i think that is a 90* angle
and above 4.6 could cause the ses light to come on
hope that helps
the 4.6 volts is after the bump stop mod,i think that is a 90* angle
and above 4.6 could cause the ses light to come on
hope that helps
Originally Posted by cueball
i belive the voltages are ( closed = .5 to .6 volts, and WOT 4.6 volts )
the 4.6 volts is after the bump stop mod,i think that is a 90* angle
and above 4.6 could cause the ses light to come on
hope that helps
the 4.6 volts is after the bump stop mod,i think that is a 90* angle
and above 4.6 could cause the ses light to come on
hope that helps
Yea he is right... here is a article about it if your interested... Answers all your Q's and A's.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
