01M6TA

iTrader: (1)

hey guys i am installing longtube headers and building true duals. anyway i left my old exhaust all cut up sittin out back of my garage, well its out of sight and everything but it got stolen. problem is my o2 sensors were still in there. i was going to lengthen the harnesses but i think i read somewhere you can buy o2 sensors that are long enough to reach. is this true? if so where is the best place to buy them?

thanks
-matt

Element

iTrader: (5)

The front sensors shouldn't need to be extended; my stock ones fit fine, as did the set of replacements I got.

babbage1109

iTrader: (11)

Bosch 13111 is the ones. But some guys swear by the ac delco with extensions. It's up to you. Any auto part store

99SSJarhead

iTrader: (2)

Or just use a standard for our cars plugged into the rear and just repin the front and rear o2 on the PCM.

01M6TA

iTrader: (1)

thanks guys ill just order the bosch ones

-matt

01M6TA

iTrader: (1)

got 2 for $100 shipped.

thanks guys

-matt

babbage1109

iTrader: (11)

Good luck. Make sure to zip tie the extra away from the headers

Wicked 94TA

iTrader: (5)

I got the Bosch's when I did my long tubes and off road y-pipe. I had more than enough wires left over once they were hooked up.