Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

New SSRA scoop design review

Thread Tools
 
Search this Thread
 
Old 01-04-2012 | 05:54 PM
  #1  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default New SSRA scoop design review

Guy's I have been testing out a new SSRA kit for the last couple of weeks and I must say that I really like it allot. I had been doing research on the kits for a while now and had always heard good things about the SSRA kit. To me the car feels faster throttle response and seems like my exhaust got a little louder. at around 60mph+ it starts to feel like it's starting to pull a little better.

here is a video and some pics of the kit.

http://www.youtube.com/watch?v=XnJbD0KBJsM

New SSRA scoop design review-kwocn.gif
New SSRA scoop design review-uauth.gif
New SSRA scoop design review-pxlgh.gif
New SSRA scoop design review-lwx88.gif

As you can see from the pics and the video the bottom scoop keeps opening up more and more the faster you go.

so all in all im very happy to have gone with the SSRA kit, I have no experience with with the previous SSRA scoop or any other kits so I can't compare it. But if you're thinking of getting one I would highly recommend it.
Old 01-04-2012 | 06:17 PM
  #2  
jaxcam02's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2010
Posts: 1,642
Likes: 19
From: Jacksonville, Fl
Default

sweet i need an intake of some sort, but I got one question, whats up with all the honking lol
Old 01-04-2012 | 06:24 PM
  #3  
jsteele90's Avatar
11 Second Club

iTrader: (13)
 
Joined: Mar 2007
Posts: 2,870
Likes: 2
From: delaware
Default

honking is annoying as hell! good idea though with the spring
Old 01-04-2012 | 06:55 PM
  #4  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

lol sorry guys, the honks in the background. One honk equals 10 miles an hour, two honks equals 20 miles an hour, and so on. I got it up to 60. it was to show how it was opening up all the way up to 60mph
Old 01-04-2012 | 07:09 PM
  #5  
jaxcam02's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2010
Posts: 1,642
Likes: 19
From: Jacksonville, Fl
Default

your not worried about it snapping off at higher speeds? hows the reinforcement to prevent this from happening?
Old 01-04-2012 | 07:25 PM
  #6  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

Originally Posted by jaxcam02
your not worried about it snapping off at higher speeds? hows the reinforcement to prevent this from happening?
nope. the only thing you will have to be careful with (depending on whether your car is lowered or not) is hitting steep driveways, speed bumps or when parking. I'm on strano's and have no clearance problems. as for the reinforcement that spring is pretty strong and the lower part of the SSRA is screwed onto the bumper.
Old 01-04-2012 | 08:00 PM
  #7  
Blk98ls1's Avatar
TECH Apprentice
iTrader: (3)
 
Joined: Dec 2005
Posts: 322
Likes: 2
From: Kingsburg, Ca (Central Valley)
Default

Okay so my lower scoop cracked and broke yesterday. Saw it when I was walking away from my car. How do I buy just the lower scoop, I would prefer the new design, but the old is fine too. I'm assuming you know the guy that makes them and that you can get me in touch with him, thanks.
Old 01-04-2012 | 08:08 PM
  #8  
jaxcam02's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2010
Posts: 1,642
Likes: 19
From: Jacksonville, Fl
Default

Originally Posted by bobbyd
nope. the only thing you will have to be careful with (depending on whether your car is lowered or not) is hitting steep driveways, speed bumps or when parking. I'm on strano's and have no clearance problems. as for the reinforcement that spring is pretty strong and the lower part of the SSRA is screwed onto the bumper.
Ya im dropped two inches and i m worried enough about the "bounce" from lousy parking lot to street transitions and the other normal lowered worries lol. how much are u dropped
Old 01-04-2012 | 09:30 PM
  #9  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

Originally Posted by Blk98ls1
Okay so my lower scoop cracked and broke yesterday. Saw it when I was walking away from my car. How do I buy just the lower scoop, I would prefer the new design, but the old is fine too. I'm assuming you know the guy that makes them and that you can get me in touch with him, thanks.
PM sent
Old 01-04-2012 | 09:33 PM
  #10  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

Originally Posted by jaxcam02
Ya im dropped two inches and i m worried enough about the "bounce" from lousy parking lot to street transitions and the other normal lowered worries lol. how much are u dropped
I'm 1.25" lowered. i think there's guys on here lowered with eibach's at like 1.50-2.00.


i think you will be ok just have to be cautious on speed bumps, steep driveways take them at an angle and you should be fine. Also be careful when parking, just stay a few feet back and you'll be fine.
Old 01-05-2012 | 01:40 PM
  #11  
SSCamaro99_3's Avatar
TECH Addict
iTrader: (1)
 
Joined: Jan 2003
Posts: 2,551
Likes: 1
From: Ballwin, MO
Default

I killed the lower of my SSRA years ago in a crappy little town in Southwest Missouri. Need to find a new lower.
Old 01-05-2012 | 05:14 PM
  #12  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

Originally Posted by SSCamaro99_3
I killed the lower of my SSRA years ago in a crappy little town in Southwest Missouri. Need to find a new lower.
pm sent
Old 01-10-2012 | 10:22 AM
  #13  
ss1le02's Avatar
TECH Resident
iTrader: (4)
 
Joined: May 2002
Posts: 769
Likes: 0
From: Hell
Default

Originally Posted by jaxcam02
your not worried about it snapping off at higher speeds? hows the reinforcement to prevent this from happening?
I exceeded 100 miles an hour many times with the new scoop. The hinge is very strong.
Old 01-10-2012 | 02:02 PM
  #14  
NemeSS's Avatar
TECH Senior Member
15 Year Member
iTrader: (127)
 
Joined: Sep 2005
Posts: 6,889
Likes: 7
From: Houston,TX
Default

Interesting idea.
Old 01-10-2012 | 02:10 PM
  #15  
sepsis's Avatar
TECH Fanatic

iTrader: (7)
 
Joined: Dec 2011
Posts: 1,003
Likes: 0
From: Tampa-ish
Default

Where can you get this?
Old 01-11-2012 | 12:52 PM
  #16  
deerslayinrednek's Avatar
10 Second Club
iTrader: (8)
 
Joined: Jan 2009
Posts: 486
Likes: 0
From: Central, PA
Default

why does the opening need to be smaller at low speeds? Why not just have it all the way open all the time instead of springing shut?....I'm just not liking it
Old 01-11-2012 | 02:25 PM
  #17  
ssteven's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: Jul 2008
Posts: 722
Likes: 1
From: The tragic kingdom
Default

Looks very flimsy. Maybe 2 springs ?
Old 01-11-2012 | 03:06 PM
  #18  
V68Sweep's Avatar
TECH Enthusiast
 
Joined: Apr 2010
Posts: 513
Likes: 0
Default

Originally Posted by jaxcam02
your not worried about it snapping off at higher speeds? hows the reinforcement to prevent this from happening?
My thoughts also.

I have the ram air intake by FastToys and it doesn't have that lower part with the spring. I would buy yours if I was NEVER worried about clearance, but that's just not possible. I definitley feel the pull with my FastToys set up. Yours looks awesome...but I say that thing is gonna bust before long.

When it's at it's highest point of opening, it seriously looks like it's 1 inch from the ground at most.

Looks cool, but I'm worried it won't last long :/
Old 02-03-2012 | 08:10 PM
  #19  
bobbyd's Avatar
Thread Starter
TECH Fanatic
iTrader: (10)
 
Joined: Mar 2008
Posts: 1,448
Likes: 0
From: San Antonio
Default

Update: guys just wanted to update this. the ssra kit is still going strong and have had no problems with it whatsoever. No scrapes, the spring is still holding strong.

I've gotten the car over 100 a few times also. just to see if the spring will come loose or start to give out and its still like it was from the first day i put it on.

Another thing like I had mentioned in my first post the temps have maintain low still. i know its still winter time but here in texas it feels like its already spring time.

just wanted to update this post/product incase anyone wanted to know how it was going with it.
Old 02-03-2012 | 11:09 PM
  #20  
technicalninja's Avatar
On The Tree
iTrader: (1)
 
Joined: Dec 2010
Posts: 133
Likes: 0
From: Ft. Worth
Default

Pretty neat idea but....

I keep imagining a squirrel crossing the road.

And NOT making it to the other side...



All times are GMT -5. The time now is 02:21 PM.