Power steering thread size
#2
TECH Senior Member
iTrader: (127)
The ones on the rack are m16x1.5 and m18x1.5
If ur making your own lines. Summit sells fittings for ps.
Oring fittings m16x1.5 to -6
And m18x1.5 to -6. So u can use -6 line to make hoses.
Fittings are like 16$.
If this is for a 98-02 fbody
U will need
M16x1.5 to -6 fitting for ps pump resevoir
M16x1.5 to -6
M18x1.5 to -6
For steering rack
And about 5ft of -6 ps high pressure line. The low pressure side can use a hose clamp on the ps reservoir side on the nipple on the reservoir.
If ur making your own lines. Summit sells fittings for ps.
Oring fittings m16x1.5 to -6
And m18x1.5 to -6. So u can use -6 line to make hoses.
Fittings are like 16$.
If this is for a 98-02 fbody
U will need
M16x1.5 to -6 fitting for ps pump resevoir
M16x1.5 to -6
M18x1.5 to -6
For steering rack
And about 5ft of -6 ps high pressure line. The low pressure side can use a hose clamp on the ps reservoir side on the nipple on the reservoir.
#3
TECH Senior Member
iTrader: (127)
Less than a 100$ if I plan on running your route for lines for turbo/headunit clearance,etc.
I make my own lines when build hotparts. But I also use a different power steering pump and remote reservoir I came up with and eliminate the stock fbody ps pump.
Looks cleaner, more clearance, remote reservoir. Steel pulley, ps pump bolt access without removing pulley
I make my own lines when build hotparts. But I also use a different power steering pump and remote reservoir I came up with and eliminate the stock fbody ps pump.
Looks cleaner, more clearance, remote reservoir. Steel pulley, ps pump bolt access without removing pulley
Trending Topics
#19
The ones on the rack are m16x1.5 and m18x1.5
If ur making your own lines. Summit sells fittings for ps.
Oring fittings m16x1.5 to -6
And m18x1.5 to -6. So u can use -6 line to make hoses.
Fittings are like 16$.
If this is for a 98-02 fbody
U will need
M16x1.5 to -6 fitting for ps pump resevoir
M16x1.5 to -6
M18x1.5 to -6
For steering rack
And about 5ft of -6 ps high pressure line. The low pressure side can use a hose clamp on the ps reservoir side on the nipple on the reservoir.
If ur making your own lines. Summit sells fittings for ps.
Oring fittings m16x1.5 to -6
And m18x1.5 to -6. So u can use -6 line to make hoses.
Fittings are like 16$.
If this is for a 98-02 fbody
U will need
M16x1.5 to -6 fitting for ps pump resevoir
M16x1.5 to -6
M18x1.5 to -6
For steering rack
And about 5ft of -6 ps high pressure line. The low pressure side can use a hose clamp on the ps reservoir side on the nipple on the reservoir.
#20
TECH Senior Member
You think he'll answer after 6-1/2 years?