which exhaust cant decide at all
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
which exhaust cant decide at all
I really like the slp lm 2 exhaust. It is one of the more free flowing exhausts out there. Can some guys with lts ory tell me how they like theres. Im gonna do heads and cam soon. I dont want to spend alot on exhaust.also i had a tune when had headers ory and lid. I since added a ls6 intake. If i add exhaust do i need a retune or can i wait until do h/c. I like tsp rumbler also. I heard magnaflow is restrictive and not much better than stock. Any other exhaust u guys like. Thanks
#2
I have the Loudmouth on my heads/cam car. I went to the summer nationals this year at the Thompson Speedway and there wasnt a car there that was noticeably louder. Magnaflow is not restrictive and if you drive your car as a daily the loudmouths are not for you.
#4
Heres mine. The lm2 is probably a tad more quiet.
#5
Launching!
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Yea way to loud. Do i need a retune when i add an exhaust. I added a ls6 intake and didnt get it retuned so with the addition of exhaust would there be problem. Any other exhaust suggestions
#6
No it will be fine but I would just do it all at once and save some money. If you want a tame exhaust Hooker or Magnaflow are quiet.
#7
12 Second Club
iTrader: (13)
I really like the slp lm 2 exhaust. It is one of the more free flowing exhausts out there. Can some guys with lts ory tell me how they like theres. Im gonna do heads and cam soon. I dont want to spend alot on exhaust.also i had a tune when had headers ory and lid. I since added a ls6 intake. If i add exhaust do i need a retune or can i wait until do h/c. I like tsp rumbler also. I heard magnaflow is restrictive and not much better than stock. Any other exhaust u guys like. Thanks
Trending Topics
#9
Launching!
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
I read that somewhere that someone switched from lm to magnaflow and lost like 10 hp probaly a different factor like weather or something. Im going to get a magnaflow and a put a cut out in the I pipe. Which cutout most guys run. So magnaflow should be good for what 10rwhp or so over the stock exhaust I have and sound a little louder.
#11
TECH Fanatic
iTrader: (20)
I had Magnaflow catbacks on both my cars until just this week. The best part was on my stroked Z28, it sounded so nice without being offensively loud. I rode the Hot Rod Power Tour this year with that catback, and I was able to listen to music the whole way without my ears ringing at stops. On my stockish B4C, it is mellow and toned until you get on it. Really I feel this is the best catback for our cars for the dollar out there!
#12
Teching In
Join Date: Apr 2012
Location: East Michigan
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I think in what you looking for Magnaflow is the way to go and for the money its worth it. Me personally I like the Borla 3" catback and i run it with no plate in the back it sounds very good, if you wanted to go a lil quieter you could put a one of the plates that come with it. Just my o2... Good luck with your built and you dont need to tune the car wait till you do the H/C than tune it.
#14
I dont think much can go wrong buying a used catback. Its a steel pipe. Just make sure its not banged on or cut.
However, if you want new, look at some of the sponsors. They can give you the best prices.
------------------------------------------------->>>>
However, if you want new, look at some of the sponsors. They can give you the best prices.
------------------------------------------------->>>>
#16
Launching!
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Thanks alot his price is so cheap. It doesnt say if it is the complete 3 inch but im sure it is. a guy on the parts classfied I thougth was a good deal but he wants 30 cheapier shipped then RPM. Im gonna order once I find out if is 3inch
#17
TECH Enthusiast
Join Date: Jun 2013
Location: Illinois, as close to "Normal" as I can get...
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by hardbones; 07-06-2013 at 05:44 PM.