Hey guys I am going to be running a FAST 102, with a FAST 102 Throttle Body and trying to connect them to each other and the stock MAF and SLP Lid intake.

Any idea what coupler sizes I need to run? I am totally lost. Thanks!

 

Yes I guess your correct, I will be running 9:1 compression the cam is a blower cam and its at 238/247 .637/.629 112 degrees +4 adv.

I need to run it na for a bit before I put the F1r on her and a cog kit.

When she is done it will be 800 to 900 wrhp..

Anyway, Go SD huh? That probably makes the most sense.

 

Uh...did you just respond to yourself Patsy57...?

 

Ha swear I'm not crazy and I meant reply to another post that must have been deleted lol

 

You quoted yourself

 

Yup lol I'm losing it

 

That's some funny **** right there

 

 

That's some funny **** right there

 

OP not sure the stock maff but if you run a 85 the 4 inch 22* rubber elbow works great. I ran one and posted some pics and how to trim it. Chris1313 did do, search that.
you really should go to the bigger maf with a 102 tb