Speed Engineering Race Version Headers Now Available!!
Launching!
Joined: May 2014
Posts: 254
Likes: 5
From: Long Island, NY
Will there be any combo deal with the Y pipe?
AS this is my first time doing headers, what other items do you suggest? Are the standard included gasksts good enough, or is it suggested that I get the GM gaskets?
I already purcahsed EGR/AIR block off plates as well as o2 from another store, so I won't need those.
Any other items?
Thanks
AS this is my first time doing headers, what other items do you suggest? Are the standard included gasksts good enough, or is it suggested that I get the GM gaskets?
I already purcahsed EGR/AIR block off plates as well as o2 from another store, so I won't need those.
Any other items?
Thanks
On The Tree
Joined: Jul 2013
Posts: 174
Likes: 0
From: Weymouth, MA
Will there be any combo deal with the Y pipe? AS this is my first time doing headers, what other items do you suggest? Are the standard included gasksts good enough, or is it suggested that I get the GM gaskets? I already purcahsed EGR/AIR block off plates as well as o2 from another store, so I won't need those. Any other items? Thanks
Good time to do:
Plugs n Wires
Poly motor mount
New o2s
Cutout(s)
Get extensions, repin pcm, or Corvette rear o2s. Upstream o2 harness doesn't reach new bung position.
GL can't wait for these!!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: Nov 2013
Posts: 106
Likes: 3
From: Omaha, NE
I'm going to be running these on a LQ9 swap. I'm in need of new O2's as it is, and since this will be a cat-less install I have the computer set up for upstream O2's only. Can I just pick up the corvette downstreams and plug n go? or will they not give proper reading for any reason? It'd be nice because these are inexpensive and have enough extension for the install. Sorry I'm pretty green on this and thanks for any advice.
I'm going to be running these on a LQ9 swap. I'm in need of new O2's as it is, and since this will be a cat-less install I have the computer set up for upstream O2's only. Can I just pick up the corvette downstreams and plug n go? or will they not give proper reading for any reason? It'd be nice because these are inexpensive and have enough extension for the install. Sorry I'm pretty green on this and thanks for any advice.
Launching!
Joined: May 2014
Posts: 254
Likes: 5
From: Long Island, NY
Sean said the standard gaskets are a paper style. Get the GM ones. I got Percy's Seal 4 Good gaskets, read some good reviews on em.
Good time to do:
Plugs n Wires
Poly motor mount
New o2s
Cutout(s)
Get extensions, repin pcm, or Corvette rear o2s. Upstream o2 harness doesn't reach new bung position.
GL can't wait for these!!!
Good time to do:
Plugs n Wires
Poly motor mount
New o2s
Cutout(s)
Get extensions, repin pcm, or Corvette rear o2s. Upstream o2 harness doesn't reach new bung position.
GL can't wait for these!!!
Will need to do plugs and wires (but my stock plugs only have 32000 miles, so not sure if I really need to do these?), and motor mounts.
On The Tree
Joined: Jul 2013
Posts: 174
Likes: 0
From: Weymouth, MA
My car has 44k on it so they are prob the plugs from the factory, haha.
So I'm doing them and granatelli wires, mounts, cutouts, and repining the pcm to save some $$$ on o2s in the future.
Got some good news. 1 7/8" Headers came into port. We should see them around Wednesday of next week here at the shop. We will ship them out to those of you who placed orders as soon as we can. Thanks again for all the pre-orders..
Sean
Sean
How's progress on the true dual (including out the back)?
Last edited by _JB_; Jul 3, 2014 at 08:07 PM.
On The Tree
Joined: Jul 2013
Posts: 174
Likes: 0
From: Weymouth, MA
NP guys. Thanks again..
_JB_: We haven't done anything on the true dual systems yet. A couple intake kits, and truck headers are going to be more expensive than we anticipated. Mold fees etc. So we put them on hold for a little while. I would still expect a prototype sent out by the end of the year from us though.
Thanks
Sean
_JB_: We haven't done anything on the true dual systems yet. A couple intake kits, and truck headers are going to be more expensive than we anticipated. Mold fees etc. So we put them on hold for a little while. I would still expect a prototype sent out by the end of the year from us though.
Thanks
Sean