Looking for single 3" Intermediate and Over Axle Pipe

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2021 | 04:12 PM

ShoreSS

Thread Starter

Teching In

Joined: Aug 2020

Posts: 24

Likes: 2

Looking for single 3" Intermediate and Over Axle Pipe

I have TSP long tubes and a TSP 3" ORY, and I am wanting to go 3" all the way out the back of the car with a single in/out muffler. I have been searching for a 3" intermediate pipe and over axle pipe, but the Dynomax pipes that I found in other threads (Dynomax 53061 & 54064) are discontinued with no superseded parts (I even called to make sure). I cant find a single in/out muffler kit. The only shop in my area that I trust doesn't have a mandrel bender. Looking for any advice, kits or pre bent pipe that y'all have used in this type of setup because I am stuck. I really don't want to spend 5-600 dollars on a single in/dual out kit just to toss the muffler and tips. A big plus would for it to be the right length to mount straight to the TSP ORY. TIA!!!!!

Jun 20, 2021 | 08:19 AM

Bob570

TECH Enthusiast

Joined: Feb 2018

Posts: 640

Likes: 297

From: Michigan

I'm pretty sure you can get them from Madhammer.

Jun 22, 2021 | 03:27 PM

ShoreSS

Thread Starter

Teching In

Joined: Aug 2020

Posts: 24

Likes: 2

Quote:

Originally Posted by Bob570

I'm pretty sure you can get them from Madhammer.

Thanks bob! I sent mad hammer a message

Jun 27, 2021 | 04:04 PM

wannafbody

TECH Senior Member

iTrader: (3)

Joined: Apr 2006

Posts: 5,606

Likes: 1,150

From: Pittsburgh

Might as well get the GMMG Madhammer exhaust

Jul 1, 2021 | 12:30 AM

RevGTO

Pontiacerator

iTrader: (12)

Joined: Nov 2003

Posts: 6,216

Likes: 236

From: Wichita KS / Rancho San Diego

Madhammer has the I-pipe but I don't know of a source for the OTA pipe now that the Dynomax pieces are discontinued. Let us know if you find one.

I had the GMMG and ended up selling it and going with the OP's approach. GMMG weighed a ton and bad rasp with long tubes.

I've been much happier with the single 3" in/out Maxflow for years now.

Jul 2, 2021 | 08:50 PM

ShoreSS

Thread Starter

Teching In

Joined: Aug 2020

Posts: 24

Likes: 2

I have been in touch with Gary at Madhammer via email. He special makes what I was looking for and doesn’t put it on the website being that it’s such an uncommon request. Very easy to work with an replies quickly.