? about powersteering pump removal
Thread Starter
On The Tree
Joined: Jun 2002
Posts: 150
Likes: 0
From: DFW
? about powersteering pump removal Is there any way to remove the power steering pump and bracket without removing the water pump first? I need to remove it, but I'm looking for the easiest way to do it. My guess, the answer is no, but I figured I figured I'd ask. Thanks guys.
I installed mine after putting on the water pump 
The top left you can just use a 15mm socket and extensions, and the bottom one you can use a short 15mm socket with elbow and extensions to get at. You'll need a 15mm wrench for the bolt on the top right that is stuck behind the fluid resevoir, get ready for a long and slow process getting this one out.
The top left you can just use a 15mm socket and extensions, and the bottom one you can use a short 15mm socket with elbow and extensions to get at. You'll need a 15mm wrench for the bolt on the top right that is stuck behind the fluid resevoir, get ready for a long and slow process getting this one out. Thread Starter
On The Tree
Joined: Jun 2002
Posts: 150
Likes: 0
From: DFW
Originally Posted by jrp
Thread Starter
On The Tree
Joined: Jun 2002
Posts: 150
Likes: 0
From: DFW
Originally Posted by BuckeyeROC
I installed mine after putting on the water pump The top left you can just use a 15mm socket and extensions, and the bottom one you can use a short 15mm socket with elbow and extensions to get at. You'll need a 15mm wrench for the bolt on the top right that is stuck behind the fluid resevoir, get ready for a long and slow process getting this one out.
The top left you can just use a 15mm socket and extensions, and the bottom one you can use a short 15mm socket with elbow and extensions to get at. You'll need a 15mm wrench for the bolt on the top right that is stuck behind the fluid resevoir, get ready for a long and slow process getting this one out. Thread Starter
On The Tree
Joined: Jun 2002
Posts: 150
Likes: 0
From: DFW
Originally Posted by Another_User
Are you replacing it, or putting on one of those really cool manual steering boxes? They look pretty neat.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Woody
JRP, I didn't see where it said anything about removing the power steering pump.
sorry, when i first read the thread i could of sworn the word "pulley" was in there. 