Ssra???
#1
Ssra???
OK my Camaro has a Loudmouth exhaust system, an airlid, K&N air filter, Ls1 Edit, 3.73 gears, 160 thermostat. Anyone know about how much power I can expect if I install a SSRA kit?
#6
!LS1 11 Second Club
Originally Posted by Andrew_071
Thanks for the info, that 15 RWHP comment has made up my mind, I'm buyin' it tonight.
I had one. 117 vs. 118mph on my cam only setup. About as good as a little tailwind. It's a little on the voodoo side of things, but eh, what the heck, every little thing helps I guess.
#7
Originally Posted by SouthFL.02.SS
If that were true, everyone would have one.
I had one. 117 vs. 118mph on my cam only setup. About as good as a little tailwind. It's a little on the voodoo side of things, but eh, what the heck, every little thing helps I guess.
I had one. 117 vs. 118mph on my cam only setup. About as good as a little tailwind. It's a little on the voodoo side of things, but eh, what the heck, every little thing helps I guess.
Trending Topics
#12
"All Motor 9 Second club member"
iTrader: (60)
It is a very worthwhile mod IMO. The HP gains won't show on a dyno, but it is worth at least a tenth in the 1/4 and a bit more in better air.
If you are going from no air induction modification to a SSRA, you will be very pleased.
I got one of the early versions that were made of brittle Polyethylene and not real durable, but it is currently in use (pieced together after many repairs) and is serving a good purpose. The metal version would be your best bet.
Good luck!!
If you are going from no air induction modification to a SSRA, you will be very pleased.
I got one of the early versions that were made of brittle Polyethylene and not real durable, but it is currently in use (pieced together after many repairs) and is serving a good purpose. The metal version would be your best bet.
Good luck!!
#13
!LS1 11 Second Club
I put it back on the car, until I ripped off the front portion again on a parking curb. After that, I used nuts and bolts and a ton of black masking tape. Worked like a charm.
Would I buy another? Maybe.
#14
!LS1 11 Second Club
Originally Posted by TXCAMSS
It is a very worthwhile mod IMO. The HP gains won't show on a dyno, but it is worth at least a tenth in the 1/4 and a bit more in better air.
If you are going from no air induction modification to a SSRA, you will be very pleased.
I got one of the early versions that were made of brittle Polyethylene and not real durable, but it is currently in use (pieced together after many repairs) and is serving a good purpose. The metal version would be your best bet.
Good luck!!
If you are going from no air induction modification to a SSRA, you will be very pleased.
I got one of the early versions that were made of brittle Polyethylene and not real durable, but it is currently in use (pieced together after many repairs) and is serving a good purpose. The metal version would be your best bet.
Good luck!!
See pic above.
#18
I had the free-mod before but it pulled too much dirt into the filter so i had to close it up, but when I had it it made a difference I could actually feel, so 10-15 HP sounds pretty reasonable to me.