HELP FAST!!!!
TECH Addict
Joined: Nov 2001
Posts: 2,593
Likes: 0
From: TEXAS
Re: HELP FAST!!!! I had to remove the steering shaft and unbolt the transmission cross brace. Then I had a friend push the tranny while I stuck the header in its place. We found this side to be easier than the passengers side.
TECH Fanatic
Joined: Nov 2001
Posts: 1,684
Likes: 0
From: Yarmouth, MA
Re: HELP FAST!!!! wack in the corner of the floor-firewall... also remove the little piece above the oil filter, and push up real hard!!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Re: HELP FAST!!!! We had to unbolt the engine mounts remove the steering shaft and unbolt the trans mount and moved the engine over, Slid right in no problem. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> If I woulda know earlier I would have bought a set of mechanics gloves to protect the back of my hands.
Re: HELP FAST!!!! If your Hookers came with the instructions, follow them. I can't believe some of the stuff you guys had to do! Banging the firewall, unbolting the engine mounts, moving the engine/tranny???? I put mine in myself and did none of that. The drivers side is so easy. Yes, remove the steering shaft (2 minutes work), and the oil diverter plate (1 minute). Granted, my car was on a lift. What exactly are you having a problem with?
<small>[ October 11, 2002, 08:51 PM: Message edited by: 11 Bravo ]</small>
<small>[ October 11, 2002, 08:51 PM: Message edited by: 11 Bravo ]</small>
TECH Apprentice
Joined: Jul 2002
Posts: 339
Likes: 0
From: Ft. Walton Beach Florida
Re: HELP FAST!!!! " instructions " <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" /> <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" /> <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" />
That's a good one, like any of the parts we get for our cars ever come with more then one page and most of the time it's only a parts picture.
Hell if we wanted instructions for our parts, that would cost us another 20% of the part's base price. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />
That's a good one, like any of the parts we get for our cars ever come with more then one page and most of the time it's only a parts picture.
Hell if we wanted instructions for our parts, that would cost us another 20% of the part's base price. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
On The Tree
Joined: May 2002
Posts: 189
Likes: 0
From: Woodridge, IL
Re: HELP FAST!!!! Thanx for the help. I got them on, however, withour even seeing these posts. I just did not know how to get the steering shaft off. I found out though. I on the other hand, did not have a lift, cause im 17 and money is very limited... <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" /> But i got them in and its running now. I only have a few more questions. Now that i have the LTs in, every time i shut off my car, it beeps five times. I had never heard this noise before, and was wondering what it was. Another is for anyone running Hooker LTs and ORP with a loudmouth exhaust. Mine did not seem to fit right, any way to change this withough sawing at the y? Also, would a bullet muffler take away any HP that i might have gained by this install. I was thinking about putting one in to get rid of the "rasp" Any insight would be appreciated. Thanx!!!!
<img border="0" alt="[Firebird]" title="" src="graemlins/formula.gif" />
<img border="0" alt="[Firebird]" title="" src="graemlins/formula.gif" />
