Porting TB in ILLINOIS
#41
Thread Starter
TECH Senior Member
iTrader: (39)
Joined: May 2006
Posts: 7,883
Likes: 2
From: Chicago
Hey TheBlur.. wnat to to come to chi-town and port mine
i am really thinking of doing this mod..
question will this cause any problems in the long run, or if i do other mods later down the road? well i need to get a tune with a ported TB?
i am really thinking of doing this mod..
question will this cause any problems in the long run, or if i do other mods later down the road? well i need to get a tune with a ported TB?
#42
Originally Posted by TORCHD 02 TA
Hey TheBlur.. wnat to to come to chi-town and port mine
i am really thinking of doing this mod..
question will this cause any problems in the long run, or if i do other mods later down the road? well i need to get a tune with a ported TB?
i am really thinking of doing this mod..
question will this cause any problems in the long run, or if i do other mods later down the road? well i need to get a tune with a ported TB?
You will have no problems with it as long as you don't grind away where the closed TB blade makes it's perimeter seal. It is a great mod and ported throttle bodies sell like hot-cakes if you want to upgrade later down the road. You should not need a tune either. Be careful when disassembling it, as the throttle position sensor (oposite of the cable cam) has a small metal ring that people always ask which way it goes in.
Use a little blue loctite on the threads when re-installing the TB blade too, don't want those badboys coming loose!