orangeapeel

iTrader: (18)

I am looking to get a different setup on mine. I have a 3" ORY with a dynomax chambered muffler and turn-down currently. It is just a rattle trap.... Lets hear some suggestions and pictures if you have them would be AWESOME.

-Jordan

orangeapeel

iTrader: (18)

No one runs this suspension?

orangeapeel

iTrader: (18)

Backup!

bayer-z28

iTrader: (14)

I'm unfamiliar w/ the BMR Track package itself... but I have a lot of BMR products. No problems at all. No track times yet...

BMR ADJ TA, ADJ PHB, SFC's, STB, LCA RLB's and Hotchkis LCA's (looking to replace w/ BMR ones)... Not rattles at all..

Good traction, no wheel hop.

I fixed the LCA's in the last pic, BTW.

SiL3NtXWS6

iTrader: (17)

i have the xtreme duty.. i used to run open Y and i now run a bullet off each collector.

orangeapeel

iTrader: (18)

I have all those parts on both cars plus a bunch more. Other than the transmission mounted tq arm and crossbrace which make the trak pack different they are nothing the same.

pharmd

iTrader: (4)

do you have a better pic of the setup you are running now. I have the same xtreme duty that you have, but I want to run a true dual set up. I need to see how you guys are doing this.

The1N_only

iTrader: (7)

i have a Spohn body mount and this is what i did and i have no rasp at all

Matt D

iTrader: (49)

ONEBADWS6 & The Juggernaut both run those torque arms with 3 in True duals. Your exhaust guy should be able to make them work. Theirs did and they both were running high 9s on motor.

Steve Burger

iTrader: (33)

I had an ATR cat back but now 6" mufflers off the header collector.

orangeapeel

iTrader: (18)

I am actually fitting the Mufflex 4" system through the crossbrace now. It was tough, and I had no clearance issues in the process. I thought that duals would have to cross right there on the loop otherwise it is a no-go.