Painted and Installed LS6 intake. Definite HP increase.
Painted and Installed LS6 intake. Definite HP increase. 
Shitty cell phone pic. Batteries were smoked in my camera.
And I like taking tons of pics of my installs. But the train was rolling, so I couldn't stop to get batteries. 
Took me and a buddy (Trigger1) about 2 1/2 hours start to finish. Didn't really have no real problems. Used the write-up from LS1howto.com as a guide. He's done this before, so he was my guide. This dude rolled in with a killer idea. Brought over some old wire loom and cut that into 1 inch sections to put around the back 4 bolts so they didn't fall. ******* genius!
Didn't break the oil pressure sending unit, but I bought one pre-install anyways, just to have in case we did. Once the old intake was off, there was all sorts of dirt and **** underneath it on the valley. How the **** does that stuff get in there?! 
Definite having the right tools for the job helped. Also what would have helped would be to have skinny *** arms and not have big sausage fingers. And those God-forsaken screws hanging down out of the cowl for the weather stripping. Those things hacked up both of our arms. Looks like a rabid cat just attacked. 
Fired it up the first time, no codes or no leaks, hunted for an idle for a few seconds and settled right in. Went for a test drive, and I could definitely feel a HP increase. Butt dyno gives it a thumbs up. I think it helped already having a full exhaust done to help things out. We have all read about the HP increase on a cammed car from going from a LS1 to a LS6. Itching to cam it out now.
Props to Tyler, if you weren't there, I probably would have never tried this on my own. You da man, don't let anybody tell you different.
Pretty straight forward install like you said, no hang ups or anything. The painted intake looks really good IMO. As for those pins they use to hold the weather stripping down what a PITA. I can't think of anything I've done on my car that has resulted in my arms/hands being more tore up than an intake swap! Over winter we need to get a cam in that bad boy then down to Bill for some tuning!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Hey that looks just like mine I did about a year ago.
I don't know if there is a write-up but I listed the paint I used in this post.
https://ls1tech.com/forums/appearance-detailing/408570-painted-ls6-manifold-pics.html
I don't know if there is a write-up but I listed the paint I used in this post.
https://ls1tech.com/forums/appearance-detailing/408570-painted-ls6-manifold-pics.html
Last edited by DreamState23x; Oct 31, 2006 at 09:47 PM.
Originally Posted by BLK02TA
Is there a write up on how to prep/paint or what paint to use?
Here are my pics and semi-write up here. --> http://www.geocities.com/mrmtransam/intake/
Originally Posted by SweeTbone
And those God-forsaken screws hanging down out of the cowl for the weather stripping. Those things hacked up both of our arms. Looks like a rabid cat just attacked.
Did the same thing to my arms finishing up my H/C. Looks like i got attacked by my fricken cat. Still have marks on my arm and this was a few weeks ago. All in good fun though... enjoy your new found power, and the 200 bucks you saved on an install.. 
Originally Posted by SweeTbone
I used Dupilcolor paint, available at most automobile stores. I used this write up here. --> https://ls1tech.com/forums/showpost....61&postcount=9
Here are my pics and semi-write up here. --> http://www.geocities.com/mrmtransam/intake/
Here are my pics and semi-write up here. --> http://www.geocities.com/mrmtransam/intake/
Originally Posted by Ace$nyper
Good stuff, and happy to hear it worked out so well.
I can't remember ever anyone saying if it worked on the butt dnyo or not but SOTP feel is always a plus!
I can't remember ever anyone saying if it worked on the butt dnyo or not but SOTP feel is always a plus!
11 Second Club
iTrader: (14)
Joined: Nov 2004
Posts: 1,653
Likes: 1
From: Michigan (Macomb or Lansing)
Haha i misread it. I got "Painted ls6 intake, Definite HP Increase" out of it. I was like oh no, he did not just say that but nice job. Ill have to check out the guide. Ill paint mine if I ever take it off.