Including myself. Oh well, I didnt buy the car for the MPG specifically. 
P/P throttle body install
P/P throttle body install Just did my own porting and polishing on my throttle body and installed it on thanksgiving... I would say this was probably one of my best mods. I noticed a good difference in throttle response and it a lot better too (being polished) very happy with results and because it was FREE!!! I highly recommend this mod to others
Originally Posted by ChaseSS
don't say that then I will lose faith in my modding shills 
but yes I will be losing gas mileage
but yes I will be losing gas mileage
keep faith my brother... everytime you step on the gas you will get a grin and feel complete because you personally contributed work into your ride
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by TORCHD 02 TA
ehh i am gonna have Bo White P&P my TB.. he is the GOD!
j/k but seriously try it yourself its not that hard and there are tons of write ups on how to do it
Originally Posted by ChaseSS
yes you could do that, but heck why don't you do it for free!!! just put a lil sweat into your car and it will make you feel better inside and a better person on the outside j/k but seriously try it yourself its not that hard and there are tons of write ups on how to do it
j/k but seriously try it yourself its not that hard and there are tons of write ups on how to do iti ahve red all the write ups... i have no idea even how much to take off.. i pretty much to all the work on the car, except friends help when i do not have the right tools
Originally Posted by TORCHD 02 TA
i ahve red all the write ups... i have no idea even how much to take off.. i pretty much to all the work on the car, except friends help when i do not have the right tools
Originally Posted by TORCHD 02 TA
i ahve red all the write ups... i have no idea even how much to take off.. i pretty much to all the work on the car, except friends help when i do not have the right tools
Originally Posted by orangeapeel
Dremel tool dude! That is all you need!
I use it first before switching over to the dremel.
I'm just worried about taking too much off and going totally FUBAR on my car... then it'll be down, and while it's down I'll feel obligated to get heads and cam... and of course a new clutch... it's a bad cycle 
Just gonna have Bo White do it
-J
Just gonna have Bo White do it
-J
Originally Posted by lastcall190
I'm just worried about taking too much off and going totally FUBAR on my car... then it'll be down, and while it's down I'll feel obligated to get heads and cam... and of course a new clutch... it's a bad cycle
Just gonna have Bo White do it
-J
Just gonna have Bo White do it
-J
see anther person that thinks like me
Originally Posted by lastcall190
I'm just worried about taking too much off and going totally FUBAR on my car... then it'll be down, and while it's down I'll feel obligated to get heads and cam... and of course a new clutch... it's a bad cycle
Just gonna have Bo White do it
-J
Just gonna have Bo White do it
-J
