Update -- Problem w/coated Pacesetters
Update -- Problem w/coated Pacesetters Update to my original thread..
Cliff notes: New pacesetter header rubbed a hole in my oil filter. Pacesetter wouldn't own up and blamed everything from motor mounts to the oil pump. After testing my header in their jig and finding "nothing wrong" with it, they send me a new one.
Old header:
New header w/old oil filter:
You be the judge.
Cliff notes: New pacesetter header rubbed a hole in my oil filter. Pacesetter wouldn't own up and blamed everything from motor mounts to the oil pump. After testing my header in their jig and finding "nothing wrong" with it, they send me a new one.
Old header:
New header w/old oil filter:
You be the judge.
that looks much better. How could they blame the motor mounts? Even if those were faulty the headers should still not be rubbing against the oil filter. Oh well, the good thing is that you got a new header. That should make up for your frustrations. Now all you have to do is get rid of that POS oil filter. 
Send that douche from Pacesetter some pics of that.
Looks like you got a fluke header before. It's rediculous that they didn't want to help you out, they only sell about 10,000 sets of those per week.
Looks like you got a fluke header before. It's rediculous that they didn't want to help you out, they only sell about 10,000 sets of those per week.
not taking sides or pass blame, but I am wondering why the person who install the header and the person who install the filter neather one saw the problem
but to be stright forward I have ran these headers for last 4 years with no filter to header problem, but I did have problem with left side banging bottom of car ,I did cut a little releaf and kink it then reweld, but back to first question,
just my rambling .02' Johnny
but to be stright forward I have ran these headers for last 4 years with no filter to header problem, but I did have problem with left side banging bottom of car ,I did cut a little releaf and kink it then reweld, but back to first question,
just my rambling .02' Johnny
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by SS SLP2
not taking sides or pass blame, but I am wondering why the person who install the header and the person who install the filter neather one saw the problem
but to be stright forward I have ran these headers for last 4 years with no filter to header problem, but I did have problem with left side banging bottom of car ,I did cut a little releaf and kink it then reweld, but back to first question,
just my rambling .02' Johnny
but to be stright forward I have ran these headers for last 4 years with no filter to header problem, but I did have problem with left side banging bottom of car ,I did cut a little releaf and kink it then reweld, but back to first question,
just my rambling .02' Johnny
I got the exact same heaers but dont got a problem with the header and oil filter hitting actually there is quite a aspace apart from each other.... well as long as u got help from them its all good
