FAST MAP Sensor?

Reply Subscribe

Thread Tools

Search this Thread

Apr 14, 2007 | 12:05 PM

Johnie_West

Thread Starter

Teching In

Joined: Dec 2006

Posts: 27

Likes: 0

From: Granbury, Texas

FAST MAP Sensor?

I need to replace my MAP sensor. I have the FAST intake. Do I have to have the FAST MAP or is the factory one just as good? FAST offers too many varieties and I don't even know which one to get. 1,2,3 or 5 bar.

Thanks in advance for any help

Apr 14, 2007 | 12:49 PM

Dmoney

TECH Resident

iTrader: (22)

Joined: Nov 2001

Posts: 836

Likes: 1

From: laredo,tx

Factory is fine..........

Apr 16, 2007 | 10:05 AM

radkon

TECH Resident

iTrader: (2)

Joined: Sep 2004

Posts: 810

Likes: 0

From: Cleveland, Oh

Factory is fine but make sure you get a new gasket with it. The FAST map hole seems a little bigger than the stock intake's and a lot of people have isses with reusing the stock gasket with it.

May 1, 2007 | 02:35 PM

aNuBiS

10 Second Club

iTrader: (25)

Joined: Feb 2004

Posts: 1,240

Likes: 1

From: Canada

Bump to find out what new gasket this is, or what the part number is.

Jan 13, 2008 | 05:11 AM

qwik_ss

On The Tree

iTrader: (9)

Joined: May 2006

Posts: 126

Likes: 0

From: Colorado

bump because I want to know what gasket do you replacce with??? Any help would be apreacited

Jan 13, 2008 | 07:58 AM

Michael02hawk

TECH Fanatic

iTrader: (26)

Joined: Feb 2005

Posts: 1,155

Likes: 1

From: Rochester, NY

16212460 MAP sensor w/Seal
16194007 Seal only

Jan 13, 2008 | 10:05 AM

allthrotle

TECH Resident

iTrader: (2)

Joined: Jul 2005

Posts: 919

Likes: 0

From: Sparks,NV

Quote:

Originally Posted by radkon

Factory is fine but make sure you get a new gasket with it. The FAST map hole seems a little bigger than the stock intake's and a lot of people have isses with reusing the stock gasket with it.

This is true, when I reused my old factory map sensor the gasket was a little worn and the hole in the fast manifold is a tad bit bigger so I ended up with a vacuum leak. I had to pull the manifold and replace the map with a new gasket, actually I had a brand new map laying around and I dont know why I didnt use it the first time.

Trending Topics

Oil Bypass Barbell

8

135
406 Hydraulic to Solid Roller cam results

12

376
Replacing My LS3 with an LSA Did I make the right choice?

5

179
4L80e loosing line pressure

35

1k
Many Camaros Chevys GM at Veteran's Car Show today

4

134

Jan 13, 2008 | 01:25 PM

Black Sunshine/ 00SS

TECH Addict

iTrader: (1)

Joined: Nov 2001

Posts: 2,161

Likes: 0

From: Michigan

The FAST map hole is way to big, unless you get the new revised intake, which will say "revised" right at the MAP hole. I found that even with a new gasket, it still was too loose. Best bet would be to get some epoxy and fill in the hole let it dry, and redrill so that it is a nice snug fit.

Even with the revised intake, the hole was still not a snug fit. So, I put some silicone around the MAP and let it sit overnight before installing.