2000 ws6

iTrader: (10)

I know Tony Mamo does excellent work and is proven. How many people have a Vengeance Ported Fast intake? Anyone have before fast porting and after results by Vengeance? I am very interested in their intake and looking for some feedback.
Thanks in Advance.

BlueThunder2

iTrader: (3)

Call Ron at Vengeance, he can show you the dyno sheets for his work.

davered00ss

iTrader: (4)

I would go with Mamo if I were to have it done.

jmill96Z

iTrader: (3)

What do the prices run on these port jobs, or is it one of those "If you have to ask, you don't need to know." type of things?

xfactor_pitbulls

iTrader: (16)

Its one of those "there isnt alot to do, and most any good shop should be fine" kinda things.

ez98ls1

iTrader: (2)

$200-$250 I think.

The Alchemist

iTrader: (19)

I'm right there with you guys. I've thought about a ported FAST for a while, but I want to make sure low end torque doesn't suffer since it is a street car first and foremost.

I'd like to see a dyno of an ls6 intake on a mild head/cam car (430hp/400tq) then swap on a ported FAST and dyno it from 2000 rpm to redline. It's great if it picks up 20 horse at 6000rpm, but if I lose 15 at 2500, it's a wash in my book, and that's an expensive wash.

Ron@Vengeance

iTrader: (51)

Guys, I am out of town right now for Mothers Day weekend, but I will post up a few comparisons when I get back to the shop. We have NEVER seen a loss down low with the addition of a ported FAST over an LS6....


As for who to go with, I dont think you can go wrong with Tony or Vengeance... Both have proven themselves time and time again... Cost could be the deciding factor.

davered00ss

iTrader: (4)

I thought Tony got like $500 to port one?

Zentenk

Do you port BBK SSI intakes?

Bo White

iTrader: (59)

Its like asking who you would rather not be in the ring with, De La Hoya or Mayweather. I wouldnt want to be in the ring with either one

vettenuts

iTrader: (4)

No. I have one of Tony's and there is more to this then just cleaning up some flash.

allngn_c5

iTrader: (3)

Louis at LG Motorsports did a tremendous job porting my 90 mm FAST. Ron and Tony are both great. It came down to cost for me. Louis hooked me up. Big time.

Josh

iTrader: (9)

I have a Vengeance Ported FAST and am very pleased with the work. I don't have any before or after results, but the porting was clean and looked professional. I'm very happy I went with Vengeance.

Josh

Full-Force

iTrader: (11)

I bet they are all doing pretty much the same thing.

Dr. Jeckel

iTrader: (12)

I would love to see a couple comparison graphs

choppin-suey

iTrader: (6)

I had one as well, it was mad ported Tony did a hell of a job and even port matched my intake to my heads with perfection, some of the best money I ever spent, not to mention customer service

allngn_c5

iTrader: (3)

Well Tony and Ron what do you think. Is it possible to do a back to back comparison on the same motor, Ron's ported 90mm Fast VS Tony's ported 90mm Fast ?? Now that would be interesting. You could each send your ported intakes to a neutral shop and have them do the dyno pulls. Good suggestion Dr. Jeckel

Dr. Jeckel

iTrader: (12)

I didn't really care about it being between the two porters, I just wanted to see a before and after of a ported vs unported FAST on a mildly cammed (mid 230's) 346 engine.
I think that a porter vs porter comparison might get touchy and that won't help anyone.

James

allngn_c5

iTrader: (3)

Why touchy, just interesting.