American Racing Headers!!!
American Racing Headers!!! I wanna get of ARH for my 01 SS and I wanna see if anybody has them already and what people think about'em, I know most people use paceseter cause they're the best for the money, but since I have little extra money I wanna spend them on a stainlees steel set! What do u guys think? Any opinions? 
I want more info on these, search is still just a little touchy... The place I went to get tuned a few weeks ago was installing a set on a C6 vette. It must've been only about 1 hour and they had the old ones out and new ones in and nearly bolted completely up. Granted it was a lift, but with the car on the ground the ARH could've been thrown straight at the engine and gone in... I also heard the power gain with them is more so than other brands...
-J
-J
Yeah, I've heard the same, no wonder they are over $1000 for a set(with Y-pipe) I still think they are nice for the money and are also stainless.I'm saving for a set, Idont care if I gotta eat freaking cerial for a month ,hahahahaah, JK
Teching In
Joined: Sep 2006
Posts: 33
Likes: 0
From: LI,NY
They are good headers without a doubt goodqualit made I perosnally know the guys of ARh their workshop is 10 mins away from me. Its pricey but you wont be disspaointed with the system trust me. I went with kooks for as its all the same product. Both stainless. Kooks headers youll also see good power gains from.
Originally Posted by Chromedz737
They are good headers without a doubt goodqualit made I perosnally know the guys of ARh their workshop is 10 mins away from me. Its pricey but you wont be disspaointed with the system trust me. I went with kooks for as its all the same product. Both stainless. Kooks headers youll also see good power gains from.
I'm also thinking to go with ORY with my SLP center loud mouth , I know it will be loud but I hope it'll sound good
I just recieved my 1 7/8 American racing headers today. I got them with a catted y. The y pipe is really nice. I actually uses a collector to go from 2 pipes to 1. I think these headers are to notch. I like the high velocity merge and the y pipe make it all worth it. These guys are good. I will put up install pics soon.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by ls2 bait
That's what I'm talking about!!!
I've got American Racing Headers in 1 7/8" along with a custom stainless true-dual set-up which was built by ARH as well. All I can say is that ARH does some AMAZING work! Honestly they really are nothing but the best, both in performance and customer service. Give them a call and I'm sure it will be an easy choice that you will be more than happy with. 
Below are a few threads with more info. pics and video...
Synergy thread which contains pics from Synergy and my personal pics before I installed the headers on the car
My true-dual thread
My thread with video and dyno #'s
Below are a few threads with more info. pics and video...
Synergy thread which contains pics from Synergy and my personal pics before I installed the headers on the car
My true-dual thread
My thread with video and dyno #'s
Can you PM how much JUST the headers were? I have TSP duals to match up to them, but I don't need a y-pipe, all I see are prices of headers/Y combo. I don't know anyone from AR that's on the forum that I could PM either.
-J
-J
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by venom ws7
^^^^^^ I've seen 8-10rwhp from headers swap.
To me Headers is one of the important mod for LS1 engines.
To me Headers is one of the important mod for LS1 engines.
a guy on these forums swapped from pacesetters to QTP's with the HVMC's and picked up 8 rwhp peak and 30 rwqt down low. that's why i bought QTP's. the only headers i'd buy for our cars are QTP's or ARH's with the edge going to QTP's for a cheaper price, better look and better welds.
people say a header is a header, but that isn't true. some headers are above and beyond better than others, not just in build quality, but in horsepower gains. that's why i bought the best money can buy. you get what you pay for. headers don't escape this statement.
Originally Posted by ChocoTaco369
a guy on these forums swapped from pacesetters to QTP's with the HVMC's and picked up 8 rwhp peak and 30 rwqt down low.
Search is rough but works, but I need something to read at work tomorrow -J
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by lastcall190
Please find me that link Search is rough but works, but I need something to read at work tomorrow
-J
Search is rough but works, but I need something to read at work tomorrow -J
i've pulled it numerous times. hopefully once the search gets straightened out, i'll be able to pull the thread. sorry
but i'm not lying to you. you're gonna have to take my word for it. a guy dynoed his car with nothing but a header swap. he gained 8-9 rwhp peak and gobs in the lower-midrange. he gained some ~30 rwtq at around 3,000 rpms
it was crazy. imagine what it would be like tuned! it sure sold me on QTP's. MPH Motorsprts has them on sale, its a killer deal! Talk to Tony! They have a 4th of July special on ARH! I'm getting a set soon! I'm so excited!
Happy 4th to everybody, I'm going to shoot some serious fireworks tonight :-)
Happy 4th to everybody, I'm going to shoot some serious fireworks tonight :-)
I just installed my ARH 1 7/8 headers and catted y. This system went in fairly easy. I put it in on the floor on some jackstands. They fit very nice and the y pipe has pretty good clearance. I can fit a beer can almost anywhere under the system. My only issue is with the tunnel brace.I doesnt fit anymore. This may be due to me choosing the 3" outlet over the 2 3/4" outlet. Guess its time for a tunnel brace torque arm thats made for headers. The sound is great. No rasp as all. I love it. I have a hooker cat back.
