Pacesetter passenger side LT clearance Question with PIC!
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Montreal, Quebec, Canada
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Pacesetter passenger side LT clearance Question with PIC!
Ok guys, I haven't finished tighting all the bolts, I can probably get the header to rise about another 1/4 to 1/2 inch but generally speaking does the passenger side hang lower than the driver side?
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Montreal, Quebec, Canada
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Wow, that makes it the lowest point on the car, sort of... Either way, like I said I can get it a 1/4 to 1/2 inch higher when I tighten the bolts I was doing it alone with a rope tied along the tubes and my arms and hands got tired as ballz. Tomorrow it is!
Trending Topics
#8
TECH Apprentice
iTrader: (14)
Join Date: Oct 2005
Location: Ewing, NJ
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Yes, passenger side sits lower, but the driver's side of the y-pipe drops down to clear the floor brace so both side sit around the same height. The picture above shows the driver's side y-pipe dropping down before it wraps around to the center of the car.