X1 Cam and AFR 205s
#1
TECH Resident
Thread Starter
iTrader: (24)
Join Date: Jan 2007
Location: Rhode Island
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
X1 Cam and AFR 205s
been searching around reading found a few things but not ready to set my mind on anything yet.
my friend wants to get rid of his 62cc afr 205 heads was wondering how would the mti x1 cam (230/227) go with it.....it should make more power than the stock 241 heads i have on there now but the reverse split and AFR's..what do you think mods are in sig'
also i have seen the prc terminator heads with mti x1 cam good numbers. and the prc heads only have a 5 cc difference on the intake runner and a couple of thousandths on the valves
PRC Term Heads...200cc 2.021in. and 1.575ex valves 62cc chambers
AFR 205s ..........205cc 2.020in. and 1.600ex valves 62cc chambers
maybe im missing something
my friend wants to get rid of his 62cc afr 205 heads was wondering how would the mti x1 cam (230/227) go with it.....it should make more power than the stock 241 heads i have on there now but the reverse split and AFR's..what do you think mods are in sig'
also i have seen the prc terminator heads with mti x1 cam good numbers. and the prc heads only have a 5 cc difference on the intake runner and a couple of thousandths on the valves
PRC Term Heads...200cc 2.021in. and 1.575ex valves 62cc chambers
AFR 205s ..........205cc 2.020in. and 1.600ex valves 62cc chambers
maybe im missing something
#2
TECH Senior Member
iTrader: (5)
yeah man, there is a guy who made sick power with the TSP terminator heads and the X1. i also seen 1 guy on here with the same setup and made 450RWHP i believe. i think it was a vette he had. im running the X1 and looking at the 5.3 heads or just going all out with the AFR 205 which is what patrick G, suggested.
#3
TECH Resident
iTrader: (6)
How much are you making with the X1 and the FAST?
As far as the heads go, do it! I'd like to have either of you be my test dummies! lol TXZ28 and I have almost identical cars, (cam, converter, built tranny, etc) so I'm just waiting on him to buy the damn heads. Hurry up!
Not to hi-jack this, but how do you like the 3.73's with the X1 (TXZ28)
As far as the heads go, do it! I'd like to have either of you be my test dummies! lol TXZ28 and I have almost identical cars, (cam, converter, built tranny, etc) so I'm just waiting on him to buy the damn heads. Hurry up!
Not to hi-jack this, but how do you like the 3.73's with the X1 (TXZ28)
#4
TECH Senior Member
iTrader: (5)
How much are you making with the X1 and the FAST?
As far as the heads go, do it! I'd like to have either of you be my test dummies! lol TXZ28 and I have almost identical cars, (cam, converter, built tranny, etc) so I'm just waiting on him to buy the damn heads. Hurry up!
Not to hi-jack this, but how do you like the 3.73's with the X1 (TXZ28)
As far as the heads go, do it! I'd like to have either of you be my test dummies! lol TXZ28 and I have almost identical cars, (cam, converter, built tranny, etc) so I'm just waiting on him to buy the damn heads. Hurry up!
Not to hi-jack this, but how do you like the 3.73's with the X1 (TXZ28)
lol!!! my twin modded buddy!!!! yeah bro, heads will be sometime next year. im up in the air on the 5.3 or AFR 205.. the 3.73 works well with the X1. it definitely rips and the car is very drivable bro.
#5
TECH Resident
Thread Starter
iTrader: (24)
Join Date: Jan 2007
Location: Rhode Island
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
The car has never been fully tuned yet but the a/f at WOT is spot on 12.8 12.9...it was only strapped on a land and sea dyno one of the most power robbing dynos I've ever been on. Example my buddys gto make 434hp on a dynojet and he ran on the dyno the same day as me and dynoed 399.9hp..
But my friend is selling them of his car because I beat him.lol.he has everything except a ewp...
If this cam does not work well with these heads ill sell the cam to my brother and just do something of a cam for stupid power.
But my friend is selling them of his car because I beat him.lol.he has everything except a ewp...
If this cam does not work well with these heads ill sell the cam to my brother and just do something of a cam for stupid power.
Trending Topics
#14
TECH Resident
Thread Starter
iTrader: (24)
Join Date: Jan 2007
Location: Rhode Island
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
why because i just want to see what this cam will do i understand these heads like traditional split cams but i have not seen anyone with a 230 227 with afr's....i have the efilive to tune it so im nt losing any money this is just curiousity. if it doesnt work ill do another cam
#18
TECH Resident
Thread Starter
iTrader: (24)
Join Date: Jan 2007
Location: Rhode Island
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
ttt..
well my friends heads are f%$#ed he broke the ringland on the #7 cylinder and it chewed the whole chamber of the head alll up so going to eastside perf. this week and gettin a tune and terminator heads over the winter...
well my friends heads are f%$#ed he broke the ringland on the #7 cylinder and it chewed the whole chamber of the head alll up so going to eastside perf. this week and gettin a tune and terminator heads over the winter...