cam plate and gear wear?
#2
TECH Senior Member
iTrader: (4)
How deep?
Also, be aware that if you are running the older style cam retainer plate with regular hex head bolts, the new retainer plates have countersunk holes and require special bolts as well. Torque values have also been changed with the new bolts.
Here is the information I found when I ran into this:
Link 1
Link 2
Also, be aware that if you are running the older style cam retainer plate with regular hex head bolts, the new retainer plates have countersunk holes and require special bolts as well. Torque values have also been changed with the new bolts.
Here is the information I found when I ran into this:
Link 1
Link 2
Last edited by vettenuts; 03-25-2009 at 04:58 AM.