vettenuts

iTrader: (4)

Ed Curtis is the designer of the Street Sweeper cams that are on the FTI web site (his site). Ed is actually local to me and has a strong engineering background. I have no clue who Mike is.

PREDATOR-Z

yes it is Ed Curtismeister that is the designmeister.

vettenuts

iTrader: (4)

I am pretty sure he was behind the AZPS cams as well (designer).

PREDATOR-Z

Yes, those as well, I have cam cards copy and they are FTI

99blancoSS

iTrader: (115)

Yea but Rhode Island?!?!?!? j/k I was joking with him about Rhody in a thread in another place.

AznMuscle

iTrader: (7)

Ed-Check with Mike...

Kyle-> Do you share the cam cards on these, or will I need to ask Mike for them?
I am just wondering on these grinds...I know of several people in the area
who run them...just trying to decide on the grind. I will still be going
through you for the kit.


Ed-I don't carry them since they were originally designed for AZPS but they can be recreated at any time. I do have the information on them.

Ed


Kyle- I have another question about your grinds. Do you still carry the AZPS02 and AZPS03 grinds?


Part of our convo before Ed squared me away. Idk know if Mike came up with the grinds, or Ed, but either way....they are a great series of cams. Maybe Ed designed the cams for Mike, I am not sure. Either way, Ed is a ******* Genius with cams. Maybe I was wrong with Mike creating them, but Ed did tell me to talk to Mike about the grinds to see which I wanted.

PREDATOR-Z

Ed designed the cams for Mike but probably vouched to only sell them through AZPS

AznMuscle

iTrader: (7)

Ahh, ok, makes sense. I love this cam though....

vettenuts

iTrader: (4)

As I said in my first post in this thread, we installed one of his small cams and did really well with it. Nice street cam that did a few short of 400 in a Vette.

PREDATOR-Z

Similar to a T-Rex, just different lobes

AznMuscle

iTrader: (7)

Yea, I hear the lobes are custom too. I don't have too much info on them. Its great on the street though, as long as you treat it as a cammed vehicle...no 1500 rpm cruising and stuff like that. Very fun to drive that is for sure.

99 Blue Bird

iTrader: (3)

are AFR and ET heads the only heads this cam is good with? i have been considering this cam but when i started the thread everyone said it was junk . but the duration numbers are good for what im after. and i was considering using a set of PRC stage 2.5 LS6 ported heads with the cam. would this be a good set up? sorry for gettin off the subject don.

studderin

iTrader: (28)

New Era sells FTi cams, so you can get them there easily. My good friend just bought a steetsweeper for his Z06, and was looking at geting some TEA heads. The car will run very well.