Performance Induction's NEW cylinder heads
#41
on your website it says
LXR-ETP CNC Ported 215 Heads: $2449 New Castings with 11* Valve Angle
Fully CNC Ports and Combustion Chambers
2.040” Stainless Intake Valves
1.570” Stainless Exhaust Valves
FTI Dual Valve Spring Package
Viton Valve Seals
Includes Custom Rocker Stands
320/211 CFM at .600” – 3.900 Bore
so it includes springs for $2450 or are these different heads...
Also the exhaust flow at .600 seems really low is that just a typo, arent most other heads in the 250-260 range
LXR-ETP CNC Ported 215 Heads: $2449 New Castings with 11* Valve Angle
Fully CNC Ports and Combustion Chambers
2.040” Stainless Intake Valves
1.570” Stainless Exhaust Valves
FTI Dual Valve Spring Package
Viton Valve Seals
Includes Custom Rocker Stands
320/211 CFM at .600” – 3.900 Bore
so it includes springs for $2450 or are these different heads...
Also the exhaust flow at .600 seems really low is that just a typo, arent most other heads in the 250-260 range
#44
On The Tree
Join Date: Dec 2007
Location: akron ohio
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
So can I get these in 225 cc for my ls2? Also can I get them at 59cc for 11.5.1 comp? Will they clear a 230/234 cam after being milled to 59cc? How do these compare to the TFS or prc 227's?
#45
FormerVendor
iTrader: (7)
I have to ask, has Performance Induction/Cary/Old ET fixed the supply issues? If there has ever been a company that has a great product, that I could never seem to get my hands on, even begging, it was these guys.
Prices are great. Product looks good as always. Now, can we actually get them?
Prices are great. Product looks good as always. Now, can we actually get them?
#46
11 Second Club
iTrader: (2)
Join Date: Dec 2005
Location: Lititz,Pa.
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
I believe the ETP heads on Eds site are indeed the old ones.I don't think any flownumbers on the new ones were posted yet.BUT I want to point out I think ETP did not use a pipe on their exhaust port.The flownumbers on the exhaust will be lower than AFR or TFS which use a pipe.If you are going to compare the numbers to pick your heads you have to know what your comparing.There should be some people on here that can give an approximate % difference for using a pipe?
#47
FormerVendor
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
For pricing and options
http://shop.virginiaspeed.com/category.sc?categoryId=64
#48
FormerVendor
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
I have to ask, has Performance Induction/Cary/Old ET fixed the supply issues? If there has ever been a company that has a great product, that I could never seem to get my hands on, even begging, it was these guys.
Prices are great. Product looks good as always. Now, can we actually get them?
Prices are great. Product looks good as always. Now, can we actually get them?
#50
On The Tree
iTrader: (7)
Join Date: Nov 2009
Location: Tigard, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Anyone here read or watch EMC? Congratulations you guys, Tony and BES came in second place against the very best in the world using these guys products and that speaks louder than any bench number! 1 look at those intake and ex runners and you can tell these will make power!
#51
TECH Junkie
iTrader: (11)
PI has 215 and 245 heads for the 4.00'' bore.there would be no problems milling them to 59cc-not sure of the actual valve drop for cam clearance.
For pricing and options
http://shop.virginiaspeed.com/category.sc?categoryId=64
For pricing and options
http://shop.virginiaspeed.com/category.sc?categoryId=64
Surely they're not really priced EACH? That would be $5800 a pair!
#54
FormerVendor
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
It's really not fair to compare Performance Inductions to ETP,2 totally different companies making the same products.I say we give Cary a chance before we talk about delivery issues.
#56
Moderator
iTrader: (20)
LXR CNC Ported 215 Heads: $
New Design Castings with 11* Valve Angle
Fully CNC Ports and Combustion Chambers
3.900 Bore has 62cc or 68cc Chambers
4.000 Bore has 66cc or 70cc Chambers
4.125 Bore has 68cc or 73cc Chambers
Relocated Valve Stem Centerlines
2.040” Stainless Intake Valves
1.570” Stainless Exhaust Valves
1.600” Stainless Exhaust Valves (optional)
Uses stock L92/LS3 or aftermarket rocker arms
New Design Castings with 11* Valve Angle
Fully CNC Ports and Combustion Chambers
3.900 Bore has 62cc or 68cc Chambers
4.000 Bore has 66cc or 70cc Chambers
4.125 Bore has 68cc or 73cc Chambers
Relocated Valve Stem Centerlines
2.040” Stainless Intake Valves
1.570” Stainless Exhaust Valves
1.600” Stainless Exhaust Valves (optional)
Uses stock L92/LS3 or aftermarket rocker arms
#58
FormerVendor
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
you can use ls3 rockers on stock ls1 heads if you put the pivot location and pushrod hole in the correct location for them
#59
11 Second Club
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
So what's going on with the heads?? Has any 215's on a SBE been tested??? If not I would be willing to test a set on the engine dyno, and chassis dyno, and then prove there power and back it up at the track!!!!! I really want some info on thes heads. Been looking for the best heads for my cam only car to turn it into a screaming H/C/I car.