FIRST PICS PRC LS-3 Aftermarket Casting Cylinder Heads Sneak Peak INSIDE!!
#1
FIRST PICS PRC LS-3 Aftermarket Casting Cylinder Heads Sneak Peak INSIDE!!
After nearly a year of development we're finally to the point where I can show you guys our newest LS based PRC castings! This all new casting is the PRC LS3 cylinder head & will be available in MANY different configurations ranging from LS1 friendly LS3 heads all the way up to large cube LS3 stroker applications! We don't have flow data or anything like this at this time, this is simply a post to let you guys checkout the progress & know we're working hard to make these cylinder heads a reality. The new changes to our castings will allow many new features on both the LS3 head & the cathedral LS heads! Keep your eyes open & we'll keep you guys updated on progress!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#7
LS1Tech Premium Sponsor
iTrader: (5)
Yes sir, that is correct!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Trending Topics
#10
TECH Veteran
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
can you ellaborate a little bit on that? do these castings have all new features that are going to be used in the cathedral port heads or are you making some monster interchangeable head?
#14
Its setup to use the LS3 or the fast intake no problem. We moved a lot of these updates over to the cathedral head including the ability to run LS3 rockers.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#16
Launching!
Join Date: Apr 2003
Location: Town near you
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts