just finished my head and cam install. what oil should i use to break in the cam. should i be running any additives they have for breaking in the cam. it is a eps cam made by comp cams. thanks for help. when can i run synthetic oil again.

 

It's a hyd roller, doesn't need to be broken in, use the oil you normally run.

 

can i put in sysnthetic oil again with cam.

 

can i run synthetic oil and synthetic oil stabilizer

 

I would skip the stabilizer - it increases the viscosity and delays lubrication on cold starts, which is when most wear occurs.

 

Like said above use the same oil you normally use. You should always try to run the same oil that you put in it before. Find a brand of oil you want to use and stick to it. Mixing oils is not good.

 

its had mobil 1 oil in it foreverer gess i put it back in.

 

would some of the gibbs brake in oil help ?

 

No, you dont need to break in a hydraulic roller. Period

 

only flat tappet lifters that had flat metal running on the cam lobe need special break in oil. Roller lifters are gtg with whatever oil you always use.