NEW UPDATE WITH BETTER VIDEO & DYNO RESULTS! Finally done with heads and cam swap!!!
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2010
Location: Clewiston , Fl
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
NEW UPDATE WITH BETTER VIDEO & DYNO RESULTS! Finally done with heads and cam swap!!!
Finally done with my Heads and Cam swap! Heads are ls6 from T.E.A. 64cc stock valves and cam is SNS TorqueMax stage 3 from Tick Performance 235/239 620/623 lift. I towed my car yesterday to Lashways in Pompano Beach for a tune.. Cant wait to get it back.. btw Martin @ Tick Performance helped me out with the whole setup, very cool guy over the phone and very helpful with any of my questions.. I highly recommend him for any upgrade mods..
Last edited by turyg ls1; 05-15-2013 at 07:51 PM.
Trending Topics
#14
FormerVendor
iTrader: (3)
His heads are only .004" difference in P to V when comparing them to a stock 243 head. The valve drop with a set of stock valved 243 heads is the same as a set of 241 heads. That said, his P to V in reality is only .004" less than a LS1 with a set of stock un milled 241's would have.
With this cam and this set-up P to V is no issue what so ever.
Sounds great Arturo!!! Now get me some track times and dyno numbers!!!
With this cam and this set-up P to V is no issue what so ever.
Sounds great Arturo!!! Now get me some track times and dyno numbers!!!
#16
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2010
Location: Clewiston , Fl
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Thanks & your right about that!
Thanks & sure will
Thanks
Thanks..
Thanks & Thanks for the respond for the other guy & as soon as I get the car back I'll post up the dyno numbers..
Thanks & I sure it will put some good numbers cause that's what Martin does!!
Thanks & sure will
Thanks
Thanks..
His heads are only .004" difference in P to V when comparing them to a stock 243 head. The valve drop with a set of stock valved 243 heads is the same as a set of 241 heads. That said, his P to V in reality is only .004" less than a LS1 with a set of stock un milled 241's would have.
With this cam and this set-up P to V is no issue what so ever.
Sounds great Arturo!!! Now get me some track times and dyno numbers!!!
With this cam and this set-up P to V is no issue what so ever.
Sounds great Arturo!!! Now get me some track times and dyno numbers!!!
Thanks & I sure it will put some good numbers cause that's what Martin does!!
#20
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2010
Location: Clewiston , Fl
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Thanks & I will since the rear wheels aren't mine.. lol
Thanks & I agree on that 1