trunnion comps???
trunnion comps??? going to do a upgrade,, comps or summits...
I have read the bad stuff on comps.. but the summits don't have the washer install tool and the bolts.. just not sure which ones to buy..
I have read the bad stuff on comps.. but the summits don't have the washer install tool and the bolts.. just not sure which ones to buy..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
They are fine. People have had problems with them and the trunion getting galled, but they won't spill needle bearings, so it's a cheap, worthwhile upgrade. If you end up getting galling on the bearing, the next option is to move to the CHE Bronzed Bushed bearing. It's $440 tho vs the $130 for the Comp...
Don't know about the Summit trunions, but a few years ago I bought a Summit brake proportioning valve. When it arrived, I took the sticker off of it & it was a Wilwood part.
got a part number for that Lunati Kit???
O.P. I have been installing comps trunion on every cam swap for almost a year now and not a single rocker arm issue. Pay attention when installing them, you can **** it up if your not careful.
O.P. I have been installing comps trunion on every cam swap for almost a year now and not a single rocker arm issue. Pay attention when installing them, you can **** it up if your not careful.
The PN is 85427.
Lunati uses new GM rockers and installs the trunions in them. I got them when the price was like $260. Now they are over $400.
At 260, with new GM rockers, it was a no-brainer. Now, I'd just get the Comp kit for 130.
Lunati uses new GM rockers and installs the trunions in them. I got them when the price was like $260. Now they are over $400.
At 260, with new GM rockers, it was a no-brainer. Now, I'd just get the Comp kit for 130.
