bigantws6

iTrader: (12)

Alright guys im thinking of doing a cam swap but wanted to see what were some of yall input

Right now im running the
Futral f14 (232/234 .598/.598 112)
Ported 241 and milled .15thousands
Ls6 intake
Qtp headers and true duals
4k stall

And im really looking into the
Speed inc s15 (231/237 .589/.595) 112LSA

Will i see any diff. I have seen alot of great results with the speed in s15 cam

HCI2000SS

iTrader: (2)

That's a very small difference for so much work lol. I'd opt for something a little bigger or not do it all

bigantws6

iTrader: (12)

Lol yea i know it is i just seen so much good result with that cam and i didnt know if their was any gains since some of the smaller cam will come around the big cams thanks alot hci just so hard picking cams for me lol

HCI2000SS

iTrader: (2)

I hear ya man, and even though there is more to a cam than just the obvious specs (lobes, ramp rates, ICL, etc...) I still think you would be dissapointed after all that time, money, and labor. Why do you want to swap if I may ask? What about your current cam don't you like?

ejbta2

Very little. I have a 228/ 230 on a 112 and my friend has a 238/24x on a 112. Both have stock blocks and same heads. They run the same times at the track.

IllusionalTA

iTrader: (9)

How much your car make now? What's the diff between your car and the ones you're lookin at

TXZ28LS1

iTrader: (5)

Spend the money on heads and fast intake!!

ejbta2

^^^^ i agree.

bigantws6

iTrader: (12)

Well i guess i see ppl with the cam trapping good mph on the 1/8 and i seem not to be trapping the mph they do im trapping 90 mph when i see other trapping 100 or pretty close .well love my cam just seem like im getting use to and seem slow now lol @illus my car only made 350 on the dyno with unlock converter it does 7.7-7.6 constant and i guess i need to do some gears still running. 3.23 just waiting on my income tax to order my rearend @txz i guess i do need to do heads what heads would be good and not tobig for my setup

bigantws6

iTrader: (12)

I might need to put my turd on a diet still full weight

IllusionalTA

iTrader: (9)

well first off, stock gear, lArge converter equals one thing .."heat" no bueno.. Goto a 3.73 in back, what converter you running? Let's dissect your combo, cause something's a miss, and we gonna figure it out...

bigantws6

iTrader: (12)

Thanks alot @illus okay im running a 4k stall 241 ported on the exhaust side only and milled .15 thousand patriot dual springs 7.4 pushrods , qtp headers 1 3/4 and ls6 intake

IllusionalTA

iTrader: (9)

Who's converter, sounds like it should make some steam...

bigantws6

iTrader: (12)

It's a revmax went from 1.55 60ft to 1.7

bigantws6

iTrader: (12)

So u think it should be running good

IllusionalTA

iTrader: (9)

You have it tuned?

bigantws6

iTrader: (12)

Yea i had tuned by two diff ppl and im still not happy