5.3 build help please.
TECH Enthusiast
Joined: Apr 2009
Posts: 723
Likes: 4
no they are like 19lbers. The article I linked by SC swapped to 36lbers. LS2 injectors are a good place to start with what you are building.
I measured the EGR on the intake I have here at the house & it is a 35mm hole for the EGR. I remember now why I just filled the tube: There isn't much meat to the back side of the hole. You could get a frost plug to plug it. a little epoxy on that would make sure it gets sealed up & stays put.
I measured the EGR on the intake I have here at the house & it is a 35mm hole for the EGR. I remember now why I just filled the tube: There isn't much meat to the back side of the hole. You could get a frost plug to plug it. a little epoxy on that would make sure it gets sealed up & stays put.
Last edited by gtfoxy; Nov 14, 2015 at 12:13 PM.
Thread Starter
On The Tree
Joined: Nov 2015
Posts: 171
Likes: 5
no they are like 19lbers. The article I linked by SC swapped to 36lbers. LS2 injectors are a good place to start with what you are building.
I measured the EGR on the intake I have here at the house & it is a 35mm hole for the EGR. I remember now why I just filled the tube: There isn't much meat to the back side of the hole. You could get a frost plug to plug it. a little epoxy on that would make sure it gets sealed up & stays put.
I measured the EGR on the intake I have here at the house & it is a 35mm hole for the EGR. I remember now why I just filled the tube: There isn't much meat to the back side of the hole. You could get a frost plug to plug it. a little epoxy on that would make sure it gets sealed up & stays put.
TECH Enthusiast
Joined: Apr 2009
Posts: 723
Likes: 4
Thread Starter
On The Tree
Joined: Nov 2015
Posts: 171
Likes: 5
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
On The Tree
Joined: Nov 2015
Posts: 171
Likes: 5
Thinking about these. Anyone have experience? its a tight fit in there especially on the drivers side with the steering shaft.
http://www.summitracing.com/int/part...make/chevrolet
http://www.summitracing.com/int/part...make/chevrolet
Thread Starter
On The Tree
Joined: Nov 2015
Posts: 171
Likes: 5
Need the shortest oil pan out there. Looking at this? Will it fit a 5.3? says LS123?
http://vancouver.craigslist.ca/rds/pts/5283298958.html
http://vancouver.craigslist.ca/rds/pts/5283298958.html
Shortest oilpan will either be from an fbody or vette, see here---> https://ls1tech.com/forums/conversio...-oil-pans.html
The one in that ad looks like a truck pan.
The one in that ad looks like a truck pan.
Thread Starter
On The Tree
Joined: Nov 2015
Posts: 171
Likes: 5
Shortest oilpan will either be from an fbody or vette, see here---> https://ls1tech.com/forums/conversio...-oil-pans.html
The one in that ad looks like a truck pan.
The one in that ad looks like a truck pan.
I have enjoyed conversing with you as well about your build Will. You know if you need any help, or have any concerns or questions you can call me, PM me or email me whenever you need my assistance.
Thank you for using SRD, I really appreciate your business sir!
Thank you for using SRD, I really appreciate your business sir!